Yes, I know, get a new one . Fires up (only using HW at mo), runs, burner on say 10-15mins then cuts out (flashing red), hold red, yellow flash once after 3 secs flashes again, after reset will work again sometimes until demand time complete. Think this indicates an ignition fault but if that's the case why when cuts out during burning!! New type pcb fitted 2009 thermistor 2014, Flushed last week with chemicals and new inhibitor as thought that might be the fault, any ideas welcome.
Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws
View the thread, titled "Potterton Suprima 50L" which is posted in UK Plumbers Forums on UK Plumbers Forums.
You need an engineer to have a look to be honest. Could be a few things. Dependant on what board you have. I know you said 09 for the board but doesn’t mean much
new type board fitted then
Even then. It can be more than 1 thing. Needs testing properly by a qualified engineer mate.
Not gonna get the answer you’re looking for unless you are Gas Safe
Closed
Get a gas safe engy out this forum isn’t for diy repairs or fault finding on fuel burning appliances unless your qualified
Get a gas safe engy out this forum isn’t for diy repairs or fault finding on fuel burning appliances unless your qualified
Official Sponsors of Plumbers Talk
Reply to the thread, titled "Potterton Suprima 50L" which is posted in UK Plumbers Forums on Plumbers Forums.
Similar plumbing topics
We recommend City Plumbing Supplies, BES, and Plumbing Superstore for all plumbing supplies.
