Potterton suprima 60 aps fault

[Tb28vegas]

Just visited a boiler where ignition and gas were not being energised, fault finder shows replace APS, but having done that the fault remains. Fan starts when calling for heat, but no other action, boiler does not go into lockout, after 3 attempts just keeps trying and failing. No wiring loom issues apparent, just cannot see how replacing other parts will affect anything other than new PCB. Big cost with no fault diagnosis to go on.

 

[Dotty]

We cannot and will not give advice on the installation or repair of boilers, cookers or ANY gas appliances for your own safety.


Please go to Gas Safe Register | Ensure your gas engineer is registered. or post a thread in the 'I'm looking for a plumber / gas engineer' section of these forums remembering to include your location. http://www.ukplumbersforums.co.uk/im...-gas-engineer/


If you are gsr please increase your post count to 10+ then send a PM (Private Message) with your gsr details to either Gas man - View Profile: gas man - Plumbing Forum | Plumbing Advice | Plumbers Forums | A forum for plumbers advice in the UK or Redsaw - View Profile: REDSAW - Plumbing Forum | Plumbing Advice | Plumbers Forums | A forum for plumbers advice in the UK who will check you and then give you access to the gsr private forum.


Providing gas-related advice to anybody who should not be touching gas and cannot prove their competetence is unacceptable. We will take whatever action we deem appropriate to prevent such advice being given



Thank you.


UKPF TA's, Mods and Admin teams.


[DLMURL="http://www.co-gassafety.co.uk/deaths.html"]CO Gas Safety[/DLMURL]


http://www.ukplumbersforums.co.uk/central-heating-forum/42241-notice-gas-safety-related-advice.html