pressurising all hot water with pump?

[aimless]

Hi all
We are modernising and old semi. We have 1 shower, and basin on 1st floor and 1 sink on ground floor kitchen.
Can we run 1 pump to pressurise all 3? instead of using 1 for shower and another for the sink/basin.
We have a cold storage tank and indirect central heating copper cylinder.
Thank you!

 

[SimonJohns]

Why can't you just change the cylinder for an unvented one. Make sure you get a qualified plumber to fit it thou


Sent from my iPhone using Tapatalk

 

[SafeGasInstall]

cheaper option is to run a pump ! single impeller will do the job if cold water is ok ! make sure that your cylinder is upgrade
to large one as pump will finish the hot water in no time !

 

[aimless]

The cylinder is less than 2 yrs old - I can't recall the size right now.
We're trying to go with the 'cheapest' option and it seems to be a pump rather than going to a pressurised tank.

 

[aimless]

Why can't you just change the cylinder for an unvented one. Make sure you get a qualified plumber to fit it thou


Sent from my iPhone using Tapatalk

£££ and £