Programmer/boiler compatibility

[Meady]

Looking at a boiler change, going to fit a new worcester Bosch boiler and they have a potterton ep2 programmer, would this be suitable for the new boiler or do they only suit potterton boilers. Cheers

 

[jtsplumbing]

First question is are you allowed to change the boiler ? [gas Safe] if you have experience doing boiler swaps you should know the answer to this question.

 

[heliotrope]

The EP2 programmer will be absolutely fine for the Worcester boiler.

 

[Meady]

I am gas safe, Andrew mead - 17504

99% of my work is on building sites. I just do this on weekends, and I don't really come across potterton programmers when doing boiler changes round my way 🙂

 

[Meady]

And cheers heliotrope, much appreciated 🙂

 

[E4gas]

I am gas safe, Andrew mead - 17504

99% of my work is on building sites. I just do this on weekends, and I don't really come across potterton programmers when doing boiler changes round my way 🙂

Not that Im checking up on you ,
that number comes up as Paul mead - 17504
you might need to contact gas safe

 

[jtsplumbing]

Does seem a low number !

 

[Meady]

That's my old man, I'm an operative under him, saves paying for my own number 🙂 he's been doing it 20 years hence the low number.

 

[jtsplumbing]

Need to ask your dad about Potterton programmer's he must have done loads of them, almost all the ones I came across when I lived in Berkshire were either Potterton or Honeywell .