Shower waste below height of saniflo

[dpcook]

Hi,

I am trying to fit a low profile shower base in a basement toilet which has an existing sanibest. The saniflo will be 5 inches above the level of the shower tray. Does anyone know of any simple in line pump or someway round this problem.

 

[ajs heating]

use a drydeck pump system we use these on wetrooms and they are used also for your situation.

Products: Waterproofing | Gradients | Drainage | Heating | Shower Screens#

 

[Phil]

Hi,

I am trying to fit a low profile shower base in a basement toilet which has an existing sanibest. The saniflo will be 5 inches above the level of the shower tray. Does anyone know of any simple in line pump or someway round this problem.

Would increasing the height of the shower tray on a wooden base be suitable for your installation? I've seen this done before, and will acheive the desired fall to the saniflo without another pump.

 

[ajs heating]

so saniflo is 5" above shower tray now.
so by the time you have raised the tray to get min 18mm full on shower waste the tray will be about 10" of the floor.
not practical and will look appalling