Slow dry solvent cement for ABS

[DaveTaylor1174]

Hi, does anyone know of a slow dry/cure solvent cement for ABS waste pipes please?

Got some 50mm floplast ABS waste pipes in a tricky ceiling that will be a pain to get the cement on, line up and push together before the normal solvent cement goes off - in the 15 seconds you get to fit them together. Are there any slower drying products out there?

I emailed Griffon and they said their UNI-100 GT would work on ABS but not to use too much. But now struggling to find it in a small pot.

Any advice gratefully received.
Thanks,
Dave.

 

[ShaunCorbs]

I don’t know of any sorry you could have a look at the pressure plastic stuff eg the stuff they use for pools as I’m sure that takes 24 hours to go off eg durapipe

 

[DaveTaylor1174]

I don’t know of any sorry you could have a look at the pressure plastic stuff eg the stuff they use for pools as I’m sure that takes 24 hours to go off eg durapipe

Thanks Shaun, I've emailed a few today. I reckon the Griffon UNI-100 GT will do it but getting hold of a small tin rather than 5 litres is like pulling teeth.

 

[ShaunCorbs]

Thanks Shaun, I've emailed a few today. I reckon the Griffon UNI-100 GT will do it but getting hold of a small tin rather than 5 litres is like pulling teeth.

Griffon PVC cement UNI-100, 250 ml, 616006

616006 - Griffon PVC cement UNI-100, 250 ml

www.vanwalraven.com