S
steveo 1
boiler was working fine then came home and it had stopped. The pressure was very low (bottomed out) and had red light on. I have refilled the loop to around 1.25 bar and now when I turn the boiler back on, the green light is on but there is no heat either for the central heating or for the hot water.
According to the manual, all I need to do is to to switch the heating to BOTH (picture of tap and radiator) then turn CH to full and it should start up.
There is a timer (which is set to permenantly on) and there is NO thermostat. Can anyone think of anything else I need to check before the boiler should fire back up please?
As mentioned in the header, it is a Vokera Linea 24.
Any help would be appreciated as I don't want to pay a call out just for someone to spend ten seconds doing what I should have done myself.
Many Thanks
Steveo
According to the manual, all I need to do is to to switch the heating to BOTH (picture of tap and radiator) then turn CH to full and it should start up.
There is a timer (which is set to permenantly on) and there is NO thermostat. Can anyone think of anything else I need to check before the boiler should fire back up please?
As mentioned in the header, it is a Vokera Linea 24.
Any help would be appreciated as I don't want to pay a call out just for someone to spend ten seconds doing what I should have done myself.
Many Thanks
Steveo