Stop Valves for LDC 50mm Connection

[Naseemkhan1682]

Hello,

I received an offer from the Water Board for a LDC MDPE 50mm connection.

We are currently laying the works required in our boundary.

A stop valve is required for the external meter chamber but we are unsure which type to buy?

There are many available online with substantially different price points.

The water board have also been no help on this.

 

[ShaunCorbs]

The water board will supply the stop tap and meter as it’s there responsibility to maintain all you will need is a connection out

Also don’t forget it will need to be flushed and chlorinated as it’s 50mm specialist job

 

[Naseemkhan1682]

Hello Shaun,

Please see the attached screenshot of the instructions given to us by the Water Board, I have indicated what I mean.

 

[Naseemkhan1682]

The water board will supply the stop tap and meter as it’s there responsibility to maintain all you will need is a connection out

Also don’t forget it will need to be flushed and chlorinated as it’s 50mm specialist job

They have told us we will need to install these stop valves.

 

[ShaunCorbs]

Fair enough one stop tap is normally enough and normally with the meter but hay ho water board are a rule on there own

City Irrigation Ltd is under construction

rrigation and Water Industry Products

cityirrigation.co.uk

And two of these or a long stainless nipple eg 6-8”

 

[Naseemkhan1682]

Thanks for this Shaun.

The price is quite a lot for this.

I notice the price of these vary. Is there any logic as to why we require the one that you suggest?

The pipe is MDPE, I don't know if this changes anything?

 

[ShaunCorbs]

You will need a drz underground rated it will be expensive as it’s solid brass