Hello all,
I'm going to be swapping a bath for a shower tray. Due to tiled floor etc when tray is in position there is no access underneath tray to tighten and inspected waste from below. Are there any such wastes that can be tightened from above once tray has been positioned over it / pipes and waste lined up exactly? I have always had access via hole in floor and then tiled or had it on risers. I don't like the idea of not being able to visually inspect the seal between tray and waste, however are there any options re: wastes? Alternative is to cut a hole in ceiling below but would like to try to avoid.
I'm going to be swapping a bath for a shower tray. Due to tiled floor etc when tray is in position there is no access underneath tray to tighten and inspected waste from below. Are there any such wastes that can be tightened from above once tray has been positioned over it / pipes and waste lined up exactly? I have always had access via hole in floor and then tiled or had it on risers. I don't like the idea of not being able to visually inspect the seal between tray and waste, however are there any options re: wastes? Alternative is to cut a hole in ceiling below but would like to try to avoid.
