The bathroom tap 300mm flexi is too short

[Tezzer2022]

Hello
I have had to adjust a sink hight by several mm. Now my bathroom basin 300mm flexi is a fraction too short. It does up but under tension. Is there a bush of some sort that I could use to extend by a few mm. Ideally 1cm or more. I’m thinking that a 500mm would have too much slack. Or would a 500mm flexi be ok?

Regards
Tezzer

 

[ShaunCorbs]

500mm is fine

 

[fowlerboi]

You can buy brass tap extensions which will extend it roughly 10mm

 

[Robooo]

There are some Flexi in-between if you mind the slack.

 

[Tezzer2022]

500mm is fine

Thanks Shaun