The ultimate which combi poll

[Ray Stafford]

Its going in my house. Price isn't completely meaningless, but this won't get decided on the basis of cost.

One bathroom, boiler is in airing cupboard right next door. Horizontal flue, but 3 storeys up. 22mm gas all the way to the boiler, plenty of flow and pressure, but no room for an unvented cylinder.

Only me and Mrs S living there now. I prefer the shower, Mrs S like to soak in the tub. We expect to own the house for a while yet, and it will be serviced regularly (unlike the out-going floor standing combi)

So, which of the 4 should I go for?

There is no "other" option, as I wont support a manufacturer who doesn't support us.

 

[newcastle phill]

Vogue

 

[Ray Stafford]

Vogue

There should be a poll thingy for you to vote on Phill! 🙂

 

[Barry98]

I knock he first two off , and I wouldnt use the fourth as you know

 

[kris]

Seems to be a landslide with the first three votes, interesting to see how it goes,

 

[Nostrum]

Big combi, 3 storeys, mansion like yours, sounds like 22mm may not be enough, Raymondo.

I would also like to say that they will all be crap if they aren't fitted well.

 

[Ray Stafford]

Big combi, 3 storeys, mansion like yours, sounds like 22mm may not be enough, Raymondo.

Its the same old narrow-but-tall 3 bedroom terraced house that I've lived in for 20 years - hardly a mansion. 🙂

I would also like to say that they will all be crap if they aren't fitted well.

Good point. Can anyone direct me to an online forum where I might find a competent heating engineer?

🙂

 

[newcastle phill]

Ahh on tappa talk. I cant see the poll or also who is bum safe registered etc.

Vogue my reason.
You like a bath so you can fit a biggun (40) for good hot water flow and also benefit from the low modulation Kw on heating side.

 

[townfanjon]

Come on Ray , get a grip ....... Viessmann pal

 

[Nostrum]

I would still argue why you need a 40kW boiler to be honest. A 32kw would only take a few minutes longer to run a bath. All this litres/min talk is pub chat in real world. If you want supersonic flow rates, go unvented.

 

[AlexGas]

Ideal combi boiler for Ray? The answer is in the question. :smile:

 

[Nostrum]

Are you going to order it online so you get the biscuits, Ray?

 

[Killy Bing]

atag q series 😛

voted

 

[SimonG]

Intergas 🙂 🙂

Thats an oil one isnt it? 🙂

 

[kris]

40 is way oversized for one bathroom, 30 -34 depending on make n model, the 40 may need 28mm gas depending on length of run as the usage is around 4.4m3'

 

[newcastle phill]

Depends how long you want it to take to fill a bath.

 

[Killy Bing]

40 is way oversized for one bathroom, 30 -34 depending on make n model, the 40 may need 28mm gas depending on length of run as the usage is around 4.4m3'

it's only oversized till the missues decides to do the washing up while you're in the shower !!

 

[Killy Bing]

ray, what was your old floor stander ? i'm assuming you want the same performance from it?

 

[gasmanrob]

I reckon it was a high flo

 

[IDCHAPPY]

It's a close run thing so far.... 😛

 

[Ray Stafford]

ray, what was your old floor stander ? i'm assuming you want the same performance from it?

Its a Radiant RBA/CS. It's a 28kw combi coupled with a 45 litre built in storage. Brilliant for the first few minutes, then very average once the store is exhausted.

 

[kris]

it's only oversized till the missues decides to do the washing up while you're in the shower !!

Are u saying a 34kw won't manage 2 outlets, not saying it will be full flow but it will cope,

 

[Killy Bing]

it would run it BUT i would want minimal interruption to my shower.
75+vat difference in boiler sizes.

providing the gas + flow rate will be sufficient then why not.
i know it won't modulate as low.
Ray may decide to get a deluge head for his shower or he could already have it.

 

[Rickster123]

Can we all come and solder one joint? I'd work for cheese and biscuits and a large port.

 

[Rickster123]

Oh vogue by the way. Voted.

 

[Ray Stafford]

Can we all come and solder one joint? I'd work for cheese and biscuits and a large port.

I can probably manage the cheese and biscuits. And Pompey is quite a large port. Oh - was that not what you meant?

 

[Rickster123]

I can probably manage the cheese and biscuits. And Pompey is quite a large port. Oh - was that not what you meant?

Id settle for a Gordon's g&t. But I only do supply and fit.

 

[PlumbBobBob]

i'll come and solder a joint too and vogue for me :smile5:

 

[jtsplumbing]

Looking at the list are these the ones left over [Freebies] from Reps ?? Know its not on list but Intergas would be good choice to add.

 

[gasmanrob]

I'll come and press a joint none of this soldering malarkey sounds hard work! I'm also not lifting any carpets floors or furniture and should you decide to pop home early I cannot and will not be held responsible for being found clad in your wardrobe strutting about performing impressions of your good self

 

[Billy Bob Bob]

dont trust ideal personally,even though the vogue is a good un,Baxi for me,better boiler,IMHO problems have been ironed out,got record of reliability

 

[jtsplumbing]

I'll come and press a joint none of this soldering malarkey sounds hard work! I'm also not lifting any carpets floors or furniture and should you decide to pop home early I cannot and will not be held responsible for being found clad in your wardrobe strutting about performing impressions of your good self

Would be good to see ! Understand only Women's cloths in His wardrobe !!! :gorgeous:

 

[Ray Stafford]

Would be good to see ! Understand only Women's cloths in His wardrobe !!! :gorgeous:

Not entirely true. There's also the uniforms and rubber-wear. 🙂

 

[Leo21]

dont trust ideal personally,even though the vogue is a good un,Baxi for me,better boiler,IMHO problems have been ironed out,got record of reliability

Same.

 

[Leo21]

Where's the Sime button?