Thermostat/Control box help

[Adamh2009]

However I’d be more inclined to contact danfoss and ask for a wiring diagram to suit a 2 zoned combi set up

Thanks for the advice. I will do that. Much appreciated and that you for your patience.

 

[Murdoch]

This could end up in a expensive mess .....................and no heating

 

[king of pipes]

Heating wiring is a bit of head scratcher sometimes there is no guarantee your system is wired as the diagram , I would employ a competent electricrian to resolve your problem . Kop

 

[Adamh2009]

Thanks for all your help everyone. I managed to sort this out today. Cheers for your inputs.

 

[Harvest Fields]

Go on then. So how did you do it?

 

[Adamh2009]

Checked over the wiring and one of the screws for the live was not in, so the wire was not making a connection. I did that, checked the wiring again at the thermostat and I had 240v. No major work required.

Someone previously must had noticed the heating was not working as the valves were also set to manual.