This months Gas Installer Magazine!

[Billy Bob Bob]

A link ?

it would take so long to link it of this crap lap top i am using i may die of boredom,you can either wait for my new pc to arrive or look at stans fb page gas engineers uk

 

[Billy Bob Bob]

giving it a go

 

[Rickster123]

It does look cack to be fair.

 

[newcastle phill]

It does look cack.

 

[ed209]

In a high rise building you push the flue through the wall from the inside with the sealing collar on and pull it back to make the seal. Its in the MIs

 

[ed209]

I was told a long time ago by Aniston that you shouldn't use mortar as it could corroded flue

 

[ed209]

Ariston, bloody auto correct

 

[ed209]

There's got to more to this story I can't believe you would get it for that

 

[ed209]

I've seen loads sealed, un-sealed, foam, mortar, rock wall, kitchen roll, mastic, carrier bags but whatever was used the sealing collar was usually in place so nothing was going back in

 

[Millsy 82]

I've seen loads sealed, un-sealed, foam, mortar, rock wall, kitchen roll, mastic, carrier bags but whatever was used the sealing collar was usually in place so nothing was going back in

I've seen wire wool used.

 

[Scott_D]

If it's expanded that far inside it may have done the same outside and partially blocked the flue?

 

[combo]

I think Gas Safe just like to be seen as doing something. There's never been so much regulation across all trades...are standards of workmanship higher ??

 

[AWheating]

worcester are the only manufacturer whos instruction/ Tech Bull ive seen saying you can seal externally with the rubber and expanding foam the inside to seal it. you need a six inch hole tho.

what they dont tell you is how to terminate the blow off back to the wall in flats without a ladder or scaff.

 

[GasmanxxxR1]

worcester are the only manufacturer whos instruction/ Tech Bull ive seen saying you can seal externally with the rubber and expanding foam the inside to seal it. you need a six inch hole tho.

what they dont tell you is how to terminate the blow off back to the wall in flats without a ladder or scaff.

solder a 22mm cap in 15mm pipe and push through 28mm hole, make good in side.

 

[AWheating]

solder a 22mm cap in 15mm pipe and push through 28mm hole, make good in side.

thats what it says in the worcester instructions, blumin cowboys the WB engineers. 🙂

 

[ed209]

As you probably know you can now buy the ones like you get with the Ideal logic +

 

[CXR100]

how do you receive this mag? I am gsr along with my business partner, I have never received the mag, I don't think he has either, can he contact gas safe so we both get it?

 

[newcastle phill]

They just send it to numbtys.
You must be good.....


.....do you wanna borrow my copy 😱

 

[combo]

When you sign up for GSR they give you the option of having the magazine sent to you via post or you accessing it via the Gas safe website. I opted for the latter but they still send me a copy anyway :smartass:. It's basically a few pages of prosecutions and then adverts....not worth my 400 odd quid registration fee, that's for sure.

 

[billybob150811]

I would like to know more about this one was it an old balanced flue replaced with a fanned flue and foamed ? I for one put the big rosette on the inside go outside fill with foam put weather collar on job done but this is in a 117mm cored hole if their saying I cant do that I,ll just have to go back to sand and cement