Toilet feed pipe leaking at valve

[rpm]

I'd change both straight away. Doesn't cost much

If it ain`t broke don`t fix it! Some people are living on the breadline now.

 

[Old Account]

If it ain`t broke don`t fix it! Some people are living on the breadline now.

That's true, but if you got a couple of pounds left then I'd change both parts.
I clearly understand your point @rpm and agree it's the breadline

 

[loftybloke]

If I'm honest guys I don't know which bits you're talking about 🙂
I'm going to have to ring someone as I'm not massively confident replacing the leaky bit if i'm honest, I don't want to do anymore damage than I've already done in making the leak worse!

 

[ShaunCorbs]

Best option tbh

 

[Old Account]

If I'm honest guys I don't know which bits you're talking about 🙂
I'm going to have to ring someone as I'm not massively confident replacing the leaky bit if i'm honest, I don't want to do anymore damage than I've already done in making the leak worse!

That's fair enough, if you do not feel confident then get an engineer out to solve this problem.

However, you will need to isolate the water first before changing the isolation valve. To test if you isolated the water you could flush the toilet and you will see if the toilet still fills with water or not.

Afterwards you could change either just the isolation valve or both fill valve and isolation valve with a fibre washer.

 

[rpm]

If I'm honest guys I don't know which bits you're talking about 🙂
I'm going to have to ring someone as I'm not massively confident replacing the leaky bit if i'm honest, I don't want to do anymore damage than I've already done in making the leak worse!

That`s fair enough, could easily go wrong. Don`t try and tell the person how to do the job mind as we tend to get a little huffy about that. 😉

 

[loftybloke]

Thanks again for all the advice everyone