Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws
View the thread, titled "tool box or bag?" which is posted in Plumbing Tools on UK Plumbers Forums.
Open tote for me.
I've got open tote X 2, 2 bags, 1 box
Prefer open tote
I've got open tote X 2, 2 bags, 1 box
Prefer open tote
1-94-231 | Stanley Tool Bag 390mm x 485mm x 250mm | Stanley
Best of both with the shoulder strap. Got mine for £35 in B&Q sale.
Best of both with the shoulder strap. Got mine for £35 in B&Q sale.
Last edited:
I prefer the tool box because it holds more and keeps any rain off the tools. I use a large Stanley Plumbers tool box.
When I say tool box, I mean cloth type with plastic base & reinforcing, - never a metal old fashioned box as they will damage door frames etc if you hit any.
I do some outside work, often external oil boilers, so I need a weatherproof box, unlike you gas guys who get nice easy dry work.
The open tote bag is handier though.
When I say tool box, I mean cloth type with plastic base & reinforcing, - never a metal old fashioned box as they will damage door frames etc if you hit any.
I do some outside work, often external oil boilers, so I need a weatherproof box, unlike you gas guys who get nice easy dry work.
The open tote bag is handier though.
Last edited:
I used to have a Stanley toolbox but now I use dewalt tool bag, the best thing about the box was its good for supporting pipe for soldering which you cant really do with the bag... love the bag tho and prefer it over the box DEWALT Large Round Top Rigid Bag 20" Hand & Power Tool Toolbag 1-79-211 | eBay
Think it depends what your doing, Boiler service/Repair then bag is good, only small tools required, Plumbing & install work Box, tend to use more tools.
B
Billy Bob Bob
i have this ,think mine cost more though Stanley Plastic Toolbox (W)305mm (L)584mm (D)267mm | Departments | DIY at B&Q
Every tote bag I have I end up just throwing everything in there and they break after a short time as they get too heavy, and it's too easy to just throw everything in without any organisation so takes ages to find anything.
R
REDSAW
i have tool boxes to store gas tools, tote to put hammers and special tools-torch etc. but, i recon i am the only one who still uses a bass bag for van to door stuff! easy to evacuate the job site as well.lol
think customers like to see traditional plumber especially the older ones!
think customers like to see traditional plumber especially the older ones!
Any one remember the old plumbers bag ??, opened out flat, anyone still got one ??
Ive got many tools multiple tools of one in different box's bags and places
- Stanley tool box with all my plumbing stuff
- Racco open box/tote with all my soldering gear
- forge steel box with surf that I hardly use and extra consumables and such
-Stanley tool bag with smaller bags In that like (wood chisels/electric screwdrivers and cutters/bacho ratchet set/ring spanner roll and then spare hammer and pry bar and other junk that gets lashed in
Then all my drills and power tools are in the van vault in box's
Ive got 3 ds150 cases one for gas tools one for drill and impact with all the bits and one for sds+bits then all my other drills and grinders in the vault
I've found half the time I just take what I need out of the box's/bags into the job,
But if its a bigger job I bring most of my box's/bags into the job
- Stanley tool box with all my plumbing stuff
- Racco open box/tote with all my soldering gear
- forge steel box with surf that I hardly use and extra consumables and such
-Stanley tool bag with smaller bags In that like (wood chisels/electric screwdrivers and cutters/bacho ratchet set/ring spanner roll and then spare hammer and pry bar and other junk that gets lashed in
Then all my drills and power tools are in the van vault in box's
Ive got 3 ds150 cases one for gas tools one for drill and impact with all the bits and one for sds+bits then all my other drills and grinders in the vault
I've found half the time I just take what I need out of the box's/bags into the job,
But if its a bigger job I bring most of my box's/bags into the job
R
REDSAW
it was me grandadys, only had 2 new handles and a bottom sewing in after 50 years!
Mine looks a lot like this but with plumbing tools. Grips olive cutter, LDF etc
Got bigger box for power tools, smaller one for soldering kit and briefcase sized one with foam for fga
They all slot together and i mix and match depending on the job
Got bigger box for power tools, smaller one for soldering kit and briefcase sized one with foam for fga
They all slot together and i mix and match depending on the job
Last edited:
R
REDSAW
bet you offer to do the windows on the way out for an extra fiver, dont you?
Official Sponsors of Plumbers Talk
Reply to the thread, titled "tool box or bag?" which is posted in Plumbing Tools on Plumbers Forums.
Similar plumbing topics
We recommend City Plumbing Supplies, BES, and Plumbing Superstore for all plumbing supplies.
