Guest viewing limit reached
  • You have reached the maximum number of guest views allowed
  • Please register below to remove this limitation

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

TRV valve body compatibility with Hive?

View the thread, titled "TRV valve body compatibility with Hive?" which is posted in UK Plumbers Forums on UK Plumbers Forums.

Hi

I am trying to fit a Hive Radiator valve into my existing TRV valve body to make them automatic so have bought a Hive valve to try it out. I have done this before in another install but the valves were Danfoss and directly compatible with Hive.

I am looking for an adapter that will be able to convert my existing valve body to the Hive TRV. Looking at the Hive instructions if the Adapter guide fits over the screw thread then I should ask Hive for an M28 adapter, BUT from the diagrams I don't think the M28 adapter will give the right fit as my valve body has 25mm from the top of the valve screw to the push pin and the adapter looks quite compact.

Please see the attached photos of the valve body and a comparison with a Danfoss trv screw thread for comparison.

Your ideas would be welcome, ideally, I don't want to replace the valve bodies as I will need to do 8 of them.

Many thanks

Matt
 

Attachments

  • 20231217_105510.jpg
    20231217_105510.jpg
    471.2 KB · Views: 64
  • 20231216_164020.jpg
    20231216_164020.jpg
    358.6 KB · Views: 52
  • 20231216_162247.jpg
    20231216_162247.jpg
    368.8 KB · Views: 50
  • 20231217_104745.jpg
    20231217_104745.jpg
    308 KB · Views: 51

Official Sponsors of Plumbers Talk

Reply to the thread, titled "TRV valve body compatibility with Hive?" which is posted in UK Plumbers Forums on Plumbers Forums.

We recommend City Plumbing Supplies, BES, and Plumbing Superstore for all plumbing supplies.

Sponsors

Thread statistics

Created
diy_massacre,
Last reply from
ShaunCorbs,
Replies
1
Views
772
Back
Top