unstoppable leak! PLEASE HELP PLUMBERS OF GREAT BRITAIN!

[chris watkins]

I can understand the boat level going, it might have sailed away !! but one of the little darlings must have half inched the big'en then went for the 15mm slide.

PS. Are those "Shetake" spanner ?? Surely they can't still be telling apprentices that they will under taps, when we all know all they are good for is hitting things with. :6::hammer:

 

[jtsplumbing]

Found in the past that the working parts on old stop cocks can be replaced with parts from outside garden tap, give it a go, it may still work !!

 

[josh]

Sellotape over that will defiantly work, tightly wrap it round about 20-30 times.


Had the college rule to and we had to wait as a pair of grips were not back on the board, turned out they had fallen behind a cylinder in one of the bays.

 

[Dannypipe]

OP - call a plumber mate, or take up the offer on here.

 

[jase158]

Brass Flanged Plug ¾" | Brassware Sundries | NoLinkingToThis

may be different size though, try 1", 3/8" 1/2"

Pegler stopcock 15mm | Garden Taps | NoLinkingToThis

some 15mm pipe cutters or hacksaw, job done!!!

DO NOT CUT LEAD AS NO FITTING WILL FIT THIS!!

 

[kay-jay]

Brass Flanged Plug ¾" | Brassware Sundries | NoLinkingToThis

may be different size though, try 1", 3/8" 1/2"

Pegler stopcock 15mm | Garden Taps | NoLinkingToThis

some 15mm pipe cutters or hacksaw, job done!!!

DO NOT CUT LEAD AS NO FITTING WILL FIT THIS!!

Apart from the ones that do ..........

 

[jase158]

Apart from the ones that do ..........

no fitting will fit that bulge, I will give you £50 if you can find one that goes over that bulge, without mullering the pipe