Urgent Central Heating System Pressure Problem

[lame plumber]

3 port on an unvented, your missing some essential safety features, as Mr Cropp states, get someone in to sort out that set up asap.

 

[Nigel B]

3 port on an unvented, your missing some essential safety features, as Mr Cropp states, get someone in to sort out that set up asap.

Whilst I don't understand the issues, that sounds worrying. This setup is as new when the house was built 12 years ago.... i'm surprised that something would be incorrect?

Thank you for any input 🙂

 

[Dotty]

3 port on an unvented, your missing some essential safety features, as Mr Cropp states, get someone in to sort out that set up asap.

Thought I was the only one who spotted that!

 

[lame plumber]

Thought I was the only one who spotted that!

I borrowed you stool to see it............

 

[lame plumber]

Whilst I don't understand the issues, that sounds worrying. This setup is as new when the house was built 12 years ago.... i'm surprised that something would be incorrect?

Thank you for any input 🙂

To be honest, so are we...

 

[Nigel B]

To be honest, so are we...

Would you mind giving me an idea as to what the obvious problems are?

I cant get back far enough from the cupboard to take a decent photo with everything shown - perhaps there are some other items not shown in my photos?

 

[Dotty]

You've got a fairly important safety valve missing that would cut off the primary flow in the event of the cylinder temperature overshooting its setpoint.

There's other issues but that's the main one.

 

[SimonG]

When was the last time the cylinder was serviced?

 

[lame plumber]

if it is a split coil, which it may not be then you need at least 2 other bits replace/installed urgently to make things work safely again, which are manufacturers parts. These need installing by a qualified (G3 regulated) plumber. If the coil is split then a new cyl is needed anyhow and the completed cyl inc safety devices will be installed by the plumber. Because of the risks involved in doing it wrong, this site wont offer the actual answers as folk may be tempted to give it a go themselves with poor results.

Not wishing to scare you, but this is the result of all the safety devices failing on an unvented cyl, yours is missing one of them out of the 3 normally installed.

https://www.youtube.com/watch?v=61uDmQF5I2E

your cyl should not do this,but it needs some safety device fitting as if your other 2 failed that video is a reality should things go wrong. Hence why our advice isnt forth coming and why you should get someone in to rectify the problem

 

[Nigel B]

Wow thats scary indeed!

G3 Plumber will be called in tomorrow to investigate....

Very worried now

 

[lame plumber]

only worry if you dont sort it, still got 2 safety devices and its turned off at present .... I hope

 

[Dotty]

Wow thats scary indeed!

G3 Plumber will be called in tomorrow to investigate....

Very worried now

Good man, thank you Nigel.

It's the safety of you and your family we're concerned about. And thankfully you're listening. There's too many that don't.

 

[joni os]

Great video. Puts boilermate problems in perspective.

 

[stevetheplumber]

obviously not an engineer
sorry that sounds wrong its an in joke nigel not aimed at you

 

[Nigel B]

Can anyone recommend a good G3 certified plumber in the Yeovil, Somerset sort of area that might be able to help me?

 

[Riley]

Is that a coke bottle cut in half to make a tundish?! Or is it just my eyes?!

Don't get that set up. plus it looks like the D2 isn't upsized but it could be the pic. Then there's another pic with a standard tundish?? I can't be looking hard enough