B
Bullyfuller
Hi i wonder if anybody can help ? I drained down my warmflow boiler for a new rad , now its needs 3 bar pressure to trigging boiler back into life but my mains is only 2.5 ! Any ideas
Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws
Warmflow combi water pressure problem
View the thread, titled "Warmflow combi water pressure problem" which is posted in Oil and Solid Fuel Forum on UK Plumbers Forums.
It will.be the combi. Normally the low pressure sensor resets between 1.5 and 2.0. The issue with this combi is that the filling loop and pressure gauge are connected and the low pressure sensor is on the store.
Seen issues with the flex connector getting blocked with crap and not being able to fill the boiler but the gauge says it is.
Seen issues with the flex connector getting blocked with crap and not being able to fill the boiler but the gauge says it is.
Official Sponsors of Plumbers Talk
Reply to the thread, titled "Warmflow combi water pressure problem" which is posted in Oil and Solid Fuel Forum on Plumbers Forums.
Similar plumbing topics
We recommend City Plumbing Supplies, BES, and Plumbing Superstore for all plumbing supplies.
