Hi all. We are trying to install a new washing machine in our home. The previous owners had a slot for a washing machine. We noticed that there is only one hose in the wall. I would have expected an inlet for fresh water and an outlet to drain away dirty water. Image attached. How do we use this one hose to connect the machine? Please advise. Thanks.
Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws
- Thread starter riemann1
- Start date
- May 23, 2015
- 35,144
- 1
- 14,996
- 113
- Member Type
- Heating Engineer (Has GSR)
- May 23, 2015
- 35,144
- 1
- 14,996
- 113
- Member Type
- Heating Engineer (Has GSR)
hole bottom right in the back does the plinth come out easily or whats the next until along (right)
also them electrics need sorting (loose face plate)
also them electrics need sorting (loose face plate)
both plints are screwed on tight to the base. I put my hand into the hole as far as i could but couldn't feel a pipe or anything else.
- May 23, 2015
- 35,144
- 1
- 14,996
- 113
- Member Type
- Heating Engineer (Has GSR)
- May 23, 2015
- 35,144
- 1
- 14,996
- 113
- Member Type
- Heating Engineer (Has GSR)
Quite often pipes will come from under your sink. They may have removed the hoses with the old machine.
While your installing your washer that cable wrapped in tape and smashed socket look pretty suspect. An easy fix while you have access.
While your installing your washer that cable wrapped in tape and smashed socket look pretty suspect. An easy fix while you have access.
Last edited:
Official Sponsors of Plumbers Talk
Similar plumbing topics
- Question
- Question
- Question
- Question
- Question
- Question
- Question
- Question
- Question
- Question
- Question
- Question
- buggerlugz
- UK Plumbers Forums
- Question
- Question
- Question
- Question
We recommend City Plumbing Supplies, BES, and Plumbing Superstore for all plumbing supplies.
