3
365drills
OK this might be a weird request. For 2012 we are seriously thinking of reaching out to Gas Installers to show them how veratile our diamond core kit is.
For example - Something our drill kit can do (in addition to drilling tiles) is to drill holes into solid granite worktops. Thats very useful to know when installing gas boilers over existing granite worktops.
To spread the message we are planning to advertise in Installer magazine and others but obviously to be effective and eye catching we need to photograph a small project of cutting holes in granite to demonstrate fitting the gas pipe through and the water pipes.
There seem to be no stock photographs available (I have checked) so it maybe we do it ourselves. So far I have:
1) I have a lump of granite.
2) I have a camera
3) I have the tool set
But I need a gas boiler......
Of course the boiler wont be attached to any supply. It will freestanding and I can connect it up to some ply and plasterboard. So please dont be horrified and think we are planning to work with real gas or electrics.
This will be for photographic purposes only. Here is an example of what I am sort of looking to achieve in the photo:
So the plan is to take some photographs of someone pretending to install a boiler.
To photograph the pipes going through granite worktops (maybe tiles too)
The shot has to look realistic and modern.
This might sound a bit dopey... But should I just walk into my local boiler merchant and ask if they have a spare broken boiler that we can work with.
Or am I going to chased out of the Gas-Safe premisis by angry fitters !!!
You may have other ideas about what we should do. You may also have opinions on what you would want to see in the ad.
Hopefully I can get this up and running in the next month or so and get a catalogue of shots put together.
For example - Something our drill kit can do (in addition to drilling tiles) is to drill holes into solid granite worktops. Thats very useful to know when installing gas boilers over existing granite worktops.
To spread the message we are planning to advertise in Installer magazine and others but obviously to be effective and eye catching we need to photograph a small project of cutting holes in granite to demonstrate fitting the gas pipe through and the water pipes.
There seem to be no stock photographs available (I have checked) so it maybe we do it ourselves. So far I have:
1) I have a lump of granite.
2) I have a camera
3) I have the tool set
But I need a gas boiler......
Of course the boiler wont be attached to any supply. It will freestanding and I can connect it up to some ply and plasterboard. So please dont be horrified and think we are planning to work with real gas or electrics.
This will be for photographic purposes only. Here is an example of what I am sort of looking to achieve in the photo:

So the plan is to take some photographs of someone pretending to install a boiler.
To photograph the pipes going through granite worktops (maybe tiles too)
The shot has to look realistic and modern.
This might sound a bit dopey... But should I just walk into my local boiler merchant and ask if they have a spare broken boiler that we can work with.
Or am I going to chased out of the Gas-Safe premisis by angry fitters !!!
You may have other ideas about what we should do. You may also have opinions on what you would want to see in the ad.
Hopefully I can get this up and running in the next month or so and get a catalogue of shots put together.