im out
Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws
What a nightmare in my eyes...
- Thread starter Old Account
- Start date
-
- Tags
- None
View the thread, titled "What a nightmare in my eyes..." which is posted in UK Plumbers Forums on UK Plumbers Forums.
O
Old Account
Ok,
i have employed but don't see my fault in there. He supposed to know how to install such an easy boiler to regulations. I am not holding them yet but he does and he has to make sure that the people live in a safe environment and not leaving the casing off.
I would like to know what you guys would do? Is Worcester not checking the benchmark ? If the figures doesn't make sense they would surely know wouldn't they?
I do not want that the tenants are in danger ... furthermore I would of want a nice install for such an easy job for such a price.
i have employed but don't see my fault in there. He supposed to know how to install such an easy boiler to regulations. I am not holding them yet but he does and he has to make sure that the people live in a safe environment and not leaving the casing off.
I would like to know what you guys would do? Is Worcester not checking the benchmark ? If the figures doesn't make sense they would surely know wouldn't they?
I do not want that the tenants are in danger ... furthermore I would of want a nice install for such an easy job for such a price.
O
Old Account
The Worcester has left it isolated on gas and electrics but now, the installer has left it on firing and fully working so that's more than ID ... telling me the cover is for keeping the noise down 🙂
Report him get gas safe out
O
Old Account
How do I do it ? And what do I need to say to them ?
Ron is the customer
O
Old Account
Could I do it without knowing his gas safe number ?
Yes just phone gas safe up and you want them to come out as your not happy with an installer saying it ok to leave the cover off the boiler
O
Old Account
Will do tomorrow ... don't feel great by doing it but I think I have no choice have I ?
I can not read this thread anymore. How do I stop getting notifications? Ron, either stop employing sh*t engineers or stop telling people your company fits boilers. I know I sound rude but this is so painful. YOU NEED TO GO BACK AND SWITCH THE BOILER OFF AT THE FUSE SPUR AND REMOVE THE FUSE. Then contact GAS SAFE before more damage is caused.
Give them his gas safe number it is on the benchmark. They will find it in there anyway.
O
Old Account
I won't reply no more but thanks for your help.
But you would not expect someone fully qualified doing it for 12 years they deliver such a installs would you.so not really my fault.
But I'll take it serious what you said. Thanks anyway !!! Thumbs up to ALL
O
Old Account
Close thread !!!! Shauni thanks
Underneath share thread at top unwatch (top right)
Cheers mate. Much appreciated. There is no way that he has been doing that king of Work for 12 years Ron. He has lied to you as well as being cr*p.
O
Old Account
Funny thing is the boiler does only 10lpm hahha but writing 12lpm.
Measured by Worcester today 6lpm hahahha
Measured by Worcester today 6lpm hahahha
Ronny you are digging a big hole here mate and now your about to jump in , we have tried to help you out bud but like it or not you employed him and it will come back on you , all you have to do is list the faults get him back to put them right and compleate the benchmark & commissioning properly or employ a GSRI to do it and pass the bill on to him , i told you last week you had clearence issues that kitchen unit will need to come down and stay down or be moved the casing must be removable to access the boiler for servicing and in a emergency i would like to see a ECV as the gas meter is outside , thats me done now . cheers kop
Is that the stuff i'm thinking of? Acid?
If it is, did he neutralise it to get the PH down?
Last edited:
O
Old Account
I have spoken to him and he has commission the boiler again. He also has put the controler up straight, cemented from inside around the flue, took the cupboard off and we have left it off.
O
Old Account
He wrote down mc1 but I just seen fx2 and I was wondering if he neutralised it too... I bought for him x100 & x800 so he just kept it and used whatever he used.
I would check the PH of the water just to be on the safe side if he did use FX2. It is a very strong acidic cleaner. It will do damage if it is in there for any length of time.
Official Sponsors of Plumbers Talk
Reply to the thread, titled "What a nightmare in my eyes..." which is posted in UK Plumbers Forums on Plumbers Forums.
Similar plumbing topics
We recommend City Plumbing Supplies, BES, and Plumbing Superstore for all plumbing supplies.
