Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws
View the thread, titled "What do you think of my work?" which is posted in Gaining Plumbing Experience on UK Plumbers Forums.
So if that's the case how have inter gas got around this by combining?
R
Rickster123
I'm not posting today's one, found a hole in my burn mat...
Honestys the best policy lol
I fit a Viessmann 050-W a few weeks ago and that has a combined PRV and Condense pipe.
Viessmann and Atag have combined, along with the new alphas.
All I would say is if you're combining then have a hepvo on the prv side
Also use as little 21.5 as possible 🙂
Up your sizing to 32mm and ideally use mupvc push or weld 🙂
Look in G3
All I would say is if you're combining then have a hepvo on the prv side
Also use as little 21.5 as possible 🙂
Up your sizing to 32mm and ideally use mupvc push or weld 🙂
Look in G3
arnt veissman allowed to do this due to temp stats flue stats etc etc
All comes down to approval for doing it internally 🙂
Latest G3 gives you a pretty good idea on discharging a tprv to waste, a prv is just going to give out a Lower volume 🙂
Latest G3 gives you a pretty good idea on discharging a tprv to waste, a prv is just going to give out a Lower volume 🙂
there is a thing on youtube that explains why veissman can internal prv can't be bothered to look for it at mo tho
They don't allow the water to reach boiling point by using various stats which is why they can combine prv so its never a tprv just pressure relief, they will all go that route soon .
Official Sponsors of Plumbers Talk
Reply to the thread, titled "What do you think of my work?" which is posted in Gaining Plumbing Experience on Plumbers Forums.
Similar plumbing topics
We recommend City Plumbing Supplies, BES, and Plumbing Superstore for all plumbing supplies.
