K
kay-jay
Meter test nipple, meter located in a semi concealed meter box. The box surrounded by gravel it's cold and dark and you drop nipple, nine in van and it's past 6pm
Nine in van ? Should be easy to find one eh
Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws
Meter test nipple, meter located in a semi concealed meter box. The box surrounded by gravel it's cold and dark and you drop nipple, nine in van and it's past 6pm
You will be there am or pm. You will call when 1/2 hour away. And if they are not in well that's a return visit. I love custards but they take the mick. Oh didn't think you would be finished that 1 hour job you said would take about 1 hour that quickly (1:00:01 actual time taken) I'll have to pop to the bank - 9million miles away!
Phone rings - 'Hi, can you come and replace our bath taps, we want a bath/shower mixer thingy. We also have a leak under our kitchen sink. How much will it be?'
Me - 'Usually £60 plus VAT for the first hour which is normally enough to sort both of those out.'
I get there with the apprentice. Turns out to be the original taps on an old cast iron bath. The brass backing nuts have seized onto the cast iron bath so well that nothing, and I mean nothing is getting them off. Only option is to angle grind off the taps and knock them through as there is no room to get the angle grinder underneath the bath. I explain to the customer that there is a good chance this could damage the bath. Customer understandably doesn't want to risk it as they are having the bathroom replaced next year.
Thus no pay there today.
Leaking kitchen sink waste, cheap imported sink with non-standard fittings underneath, has been bodged already. No standard pipe or trap can be inserted into the leaking outlet to repair the leak. Tried some plumbers gold, not very confident it is going to stop the leak so didn't charge any labour at all this evening.
Potentially out of this I may have a sink replacement and a bathroom install but there's a good chance I've wasted 2 hours completely tonight. All for what would have been probably £30 profit normally!
If I price any more than £60 + VAT for 1st hour customer will run a mile.
At that price all the running around (to me) getting bits etc is just not worth it.
How can anyone survive on £35 a gas check because that's what I've been undercut by. I thought the standing rate was £45. Or more. Looks like Ill have to go on agency work now. Still no work out there even for someone like me with over 10yrs experience. Is it like this down south ?
Reply to the thread, titled "Why I hate small jobs in a nutshell" which is posted in General Plumbing Jobs Discussion on Plumbers Forums.
We recommend City Plumbing Supplies, BES, and Plumbing Superstore for all plumbing supplies.