Worcester 28i junior- hot water but no central heating

[diamondgas]

Experience will tell you what is right and what is wrong.

Now that is very true 🙂🙂

 

[zeebeedee]

I'm guessing 47 311 70 zeebeedee! 🙂

Ha good guess!

 

[diamondgas]

Ha good guess!

I just so happen to have the mi's on PDF! Now they are probably the worst I've downloaded as they're not consecutive! Thankfully I'll only ever need them here online I hope!!! 😀

 

[Sammi Brown]

right you r :clap:

 

[diamondgas]

right you r :clap:

We're on the same page then Sammi? 🙂

 

[Sammi Brown]

well the old grey matter is hurting now,

 

[Sammi Brown]

does your pdf file say what it is ?????????????????

 

[diamondgas]

well the old grey matter is hurting now,

LOL ... You've spent some money trying to get to the bottom of a problem that is either the pump, or system blockage IMHO! Without being present and listening, feeling, observing and questioning your about at the limits of my assistance Sammi to be honest 🙂

What's the water colour like? Are you in a hard water area?

 

[diamondgas]

does your pdf file say what it is ?????????????????

Nope they say Jack!!! AS usual 🙂

 

[Sammi Brown]

yes in hard water area, and water colour fine 🙂 and to be honest not spent gr8 deal our local plumb centre quite cheap considering had boiler for 8 years an only just decided have problem, did function very well prior,

 

[diamondgas]

yes in hard water area, and water colour fine 🙂 and to be honest not spent gr8 deal our local plumb centre quite cheap considering had boiler for 8 years an only just decided have problem, did function very well prior,

TBH Sammi it makes a huge difference being present when diagnosing issues! From what you've said I'd be edging towards the pump. However I've found all-sorts of things that have restricted circulation in systems over the years! You can most likely get a replacement head for the pump which can save you a few bob if your wanting to try and fix this yourself? However it may not be the issue but will eliminate it from the equation yeh?

 

[Sammi Brown]

thanks for yor advice and direction, most grateful for your input

 

[diamondgas]

thanks for yor advice and direction, most grateful for your input

Hopefully helps you get to the bottom of your problem Sammi. I hope you get the issue sorted before the proper cold weather cuts in 🙂

 

[Sammi Brown]

well me too as dont think we getting summer and i very nesh, thanks again

 

[Mickyplumb]

Hopefully helps you get to the bottom of your problem Sammi. I hope you get the issue sorted before the proper cold weather cuts in 🙂

Just had a thought. The pump vent screw is easily accessible on the juniors. Could you stick a small flat screwdriver bit in a cordless drill, push it into the top of the impeller and squeeze the trigger slightly ? Kind of like assisting the pump ? Obviously have to work out if the drill needs to be in reverse or not but could be worth a try.
Just an idea, have to be careful though.

 

[Rickster123]

Just had a thought. The pump vent screw is easily accessible on the juniors. Could you stick a small flat screwdriver bit in a cordless drill, push it into the top of the impeller and squeeze the trigger slightly ? Kind of like assisting the pump ? Obviously have to work out if the drill needs to be in reverse or not but could be worth a try.
Just an idea, have to be careful though.

Or better still get a gas safe engineer in and certainly don't stick a cordless drill in your pump!

 

[diamondgas]

Just had a thought. The pump vent screw is easily accessible on the juniors. Could you stick a small flat screwdriver bit in a cordless drill, push it into the top of the impeller and squeeze the trigger slightly ? Kind of like assisting the pump ? Obviously have to work out if the drill needs to be in reverse or not but could be worth a try.
Just an idea, have to be careful though.

That's ingenious Micky!!! Much faster than the wrist action :lol: Great input, if I may add 🙂

 

[Sammi Brown]

thanks for input will have a look 2moro once my grey matter has recharged

 

[Mickyplumb]

That's ingenious Micky!!! Much faster than the wrist action :lol: Great input, if I may add 🙂

LOL diamond ! Just a crazy thought but could go towards proving/disproving a lazy pump !

 

[diamondgas]

Or better still get a gas safe engineer in and certainly don't stick a cordless drill in your pump!

:lol: :lol: worst it'll do is fex up the screwdriver bit!!! 😀