Can any of you guys recommend thin lightweight strong gloves for general work,my thumbs and fingers seem to split all the time in winter and I end up wrapping them with micropore tape to protect them. I have tried latex gloves but these split within 1/2 an hour and are useles..Thanks.
Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws
- Thread starter Plumbcrazy56
- Start date
-
- Tags
- work
View the thread, titled "Work gloves." which is posted in Gaining Plumbing Experience on UK Plumbers Forums.
D
dontknowitall
Try Mumsnet?
Not to buy the gloves obviously but I reckon this answer requires a woman's touch.
😉
No, I'm not taking the Michael - it is a genuine idea for you. More men these days are using moisturisers and skin creams - not me I hasten to add - and it could be that a cream is better than gloves.
On the other hand 🙂D😀😀) they're more likely to know of some decent gloves.
Not to buy the gloves obviously but I reckon this answer requires a woman's touch.
😉
No, I'm not taking the Michael - it is a genuine idea for you. More men these days are using moisturisers and skin creams - not me I hasten to add - and it could be that a cream is better than gloves.
On the other hand 🙂D😀😀) they're more likely to know of some decent gloves.
F
franz
Hi.i know a lot of blokes who have a bottle of washing up liquid in the back of the van,thats the worse thing to clean your hands with,it,s a de-greaser.
Vaselene is not good either.
E40 is good for hands.
My missus hates it when i try to sand her back down with hands like sandpaper.
Vaselene is not good either.
E40 is good for hands.
My missus hates it when i try to sand her back down with hands like sandpaper.
B
Bartdude
You could just man up🙂
Its almost impossible to work in gloves. I should know as I suffer from cold fingers through winter. I'm sat indoors right now in a T shirt, but my fingers are still cold to touch.
Anyway, I digress, for your problem, I would try a barrier cream. It'll form a thin barrier to repel whatevers cracking your skin, be it weather, or flux, whatever.
As for me, it's either move to a sunnier place, or shut up and get on with it....I think I have to go with number 2, the wifes got fair skin you see! 🙂
Anyway, I digress, for your problem, I would try a barrier cream. It'll form a thin barrier to repel whatevers cracking your skin, be it weather, or flux, whatever.
As for me, it's either move to a sunnier place, or shut up and get on with it....I think I have to go with number 2, the wifes got fair skin you see! 🙂
its not impossible to work with glloves, just takes a while to get used to them building sites these days they are mandatory, and so are safety glasses the lot !! real pain if you ask me !!
if you get a decent set of gloves then its usually ok, i tend to cut the fingers off them, there are a thin black set with rubber palms dont know what they are called but you'd be able to get them from toolstation or something. I thought they were the best ones. Ideal for winter though as your not touching freezing cold tools
if you get a decent set of gloves then its usually ok, i tend to cut the fingers off them, there are a thin black set with rubber palms dont know what they are called but you'd be able to get them from toolstation or something. I thought they were the best ones. Ideal for winter though as your not touching freezing cold tools
Plenty of choice at Arco (see website or call in store)
If you use barrier cream before work it will stop the dirt and you won't have to scrub your hands as much.
Hand cream such as Neutrogena or similar after work protects the skin and stops it from drying out.
Use a "natural" industrial hand cleaner with abrasive particles such as Solopol rather than the harsh detergent ones such as Swarfega. The particles will do the work rather than abrading the skin with a brush.
One of the worst things is heating oil as this dissolves the oils in the skin and causes it to dry out. Vinyl gloves are sometimes impossible to work with for fine work, or they end up letting oil in.
Different barrier creams are available for different tasks. Deb do a range. There is one available for oils and solvents.
If you use barrier cream before work it will stop the dirt and you won't have to scrub your hands as much.
Hand cream such as Neutrogena or similar after work protects the skin and stops it from drying out.
Use a "natural" industrial hand cleaner with abrasive particles such as Solopol rather than the harsh detergent ones such as Swarfega. The particles will do the work rather than abrading the skin with a brush.
One of the worst things is heating oil as this dissolves the oils in the skin and causes it to dry out. Vinyl gloves are sometimes impossible to work with for fine work, or they end up letting oil in.
Different barrier creams are available for different tasks. Deb do a range. There is one available for oils and solvents.
Last edited:
B
Billy Bob Bob
i suffer from bad hands and poor circulation but hate wearing gloves my knuckles split and bleed and my hands freeze,i use barrier cream in the day,sudocream when my hands become to painful and that green lidded one with the cream tub i cant remember the name of to protect them further,the problem is i am not routine enough looking after my hands and they are the most expensive tools we will ever own,our trade is not kind to hands dealing with water all the time but we need to look after them not to have problems we should count ourselves lucky (and a few on here will remember this) in the 70s they used paint on solder and flux a few of my dads mates ended up with industrial dermititus my dad said he would come home with massive blisters he would have to soak and pop with a needle to let the puss out,we have la-co to contend with which is bad enough
If you work for BG then gloves are mandatory, at least during manager/QC inspections anyway.
There are a wide range of rubber coated cotton gloves on the market (Ansell brand from ARCO for instance). It is best to go try on a few sizes to get a size that 'fits like a glove'😛 and are not to intrusive. I like them tighter the better as they slacken with use.
Get a good fitting pair and you will get used to them with time. They are also handy😛 for taking red hot combustion covers off.
There are a wide range of rubber coated cotton gloves on the market (Ansell brand from ARCO for instance). It is best to go try on a few sizes to get a size that 'fits like a glove'😛 and are not to intrusive. I like them tighter the better as they slacken with use.
Get a good fitting pair and you will get used to them with time. They are also handy😛 for taking red hot combustion covers off.
dont diss the kneepads best things only wear the trousers with knee pads hate working without them
Sorry GQuigley
I is so used to striding onto a job like a man on a mission and at the end of the day Hobbling out like a crippled Hobbit that I thought it was the only way to show yer had been working hard all day!!!!!
invest in the trousers with knee pads, arent too dear and defo worth it. Still end up batterd and crippled anyway but at least you save your knees lol
far from it lol
B
Bulldog
I use these and find them great even when piping up a new boiler
ANSELL HYFLEX 11-618 PU PRECISION GLOVES - 9/L on eBay (end time 30-Mar-11 11:06:27 BST)
ANSELL HYFLEX 11-618 PU PRECISION GLOVES - 9/L on eBay (end time 30-Mar-11 11:06:27 BST)
D
dontknowitall
I need a back brace and elbow protectors after today's job (twisting under a kitchen sink to replace the taps). Tomorrow I need ear plugs (looking after the children). Wednesday a wet suit for a hot water cylinder change. Thursday knee pads for a boiler and radiator. Friday loads of hand cream and protection against oil and soot from an Aga.
And, stupidly or not, I don't bother with any of this.
And, stupidly or not, I don't bother with any of this.
R
Resolute
I have bad hands too and don't take good care of them until they're bleeding and hurting. Best thing I find is barrier cream and baby moisturiser!!!!
However, following a job the other day where I was crawling through a loft and constantly on my knees (in an airing cupboard before anyone asks) I need to get some new trousers with knee pads!
However, following a job the other day where I was crawling through a loft and constantly on my knees (in an airing cupboard before anyone asks) I need to get some new trousers with knee pads!
B
Billy Bob Bob
i have the dickies ones and they are stupid the knee pad is always just below the knee it does not work
R
Resolute
The scruffs ones are supposed to be ok and on offer in screwfix so may give them ago (depending how much the mot costs this month). Failing that I'll get an external set.
S
splinterdream
I think you need to search for mechanics gloves and there is a great range at our B & Q in loughborough but all depends on the size of the store, failing that Arco
Official Sponsors of Plumbers Talk
Reply to the thread, titled "Work gloves." which is posted in Gaining Plumbing Experience on Plumbers Forums.
Similar plumbing topics
- Question
We recommend City Plumbing Supplies, BES, and Plumbing Superstore for all plumbing supplies.
