Search the forum,

adapters

An adapter or adaptor is a device that converts attributes of one electrical device or system to those of an otherwise incompatible device or system. Some modify power or signal attributes, while others merely adapt the physical form of one connector to another.

View More On Wikipedia.org
Recent contents Top users
  1. Stants

    Connecting Grohe shower using adapters to 15 mm supply

    Hi I've purchased a GROHE | Euphoria 260 Exposed Shower ( looks nice ) however Im missing some initial connecting adapters the installation instructions say it comes with " easy install adapters " and threaded tape ....I have neither of these ,all I have is the " S " unions ... so I did a bit of...
  2. S

    Radiator replacement - measurement clarification.

    I have removed a radiator and wish to replace using existing pipework and valves. The old radiator itself was 1290mm in width with a total width tail to tail of 1330mm. The pipe to pipe measurement is 1350mm. The height of the old radiator was 430mm however I could go to 500mm with the new...
  3. Achille Becker

    adapters diamteter problem plus valve

    hello all i have a problem i have a valve that is 1" wide and a hose that need t connect that is 1 1/2 wide is there anywhere coud fnd an adapter ?
    • Achille Becker
    • Thread
    • adapters america hose plus problem usa valve valves
    • Replies: 1
    • Forum: USA
  4. C

    Incompatible Pipe Adapters

    I'm looking to understand mains water pipe adapter sizes. Maybe I'm missing something, but here goes: I have 32mm plastic water pipe feeding the property. I need to step this down to 28mm plastic pipe to feed each floor and then 22mm round each floor. Looking round the internet, every...
  5. M

    Hepv0 trap adapters

    Hi I've used hepvo traps and straight adapters before to connect to 1.5 inch waste. Do they also do a bent adapter for this purpose?
  6. D

    pump head adapters

    hi guys im thuinking about buying an adapter for power flushing and their seems to be a few different makes out there. some of them look like they have plastic threads and some brass. just looking for any advice bcos i hate wasting money on poor quality tools. any advice would be appreciated ta
  7. A

    Sink with 11/4" waste outlet? Any adapters?

    Hi all, I don't normally do much plumbing, I just do boiler repairs in my daily work. But I'm moving around a stand alone sink unit at my in-laws house and I've hit a problem. I bought fittings for 11/2" and expected them to fit. But the waste outlet is 11/4". I want to use a 11/2" trap with...
  8. L

    Can you buy flush pipe adapters that was used years ago

    I would like to know if you can buy an adapter that fits inside a flush pipe so you can joint it to the siphon.
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock