Search the forum,

low flow

Baseflow (also called drought flow, groundwater recession flow, low flow, low-water flow, low-water discharge and sustained or fair-weather runoff) is the portion of the streamflow that is sustained between precipitation events, fed to streams by delayed pathways. It should not be confused with groundwater flow. Fair weather flow is also called base flow.

View More On Wikipedia.org
  1. S

    Low pressure

    Could anybody tell me why a house has very low mains pressure, there are no signs of leaks anywhere in the property, when all isolation valves are closed you can still hear water in the pipe using a screwdriver to my ear ( if that makes sense). When the stopcock is off it all goes quiet, whick...
  2. A

    Combi boiler - enough pressure for shower head?

    I have a SIme Halstead Combi30/90 combi boiler. It says it gives hot water at outputs between 8.79kW (30,000 Btu/h) and 26.4kW (90,000 BtU/h) flowrate seems t be between 8.4 and 10.8 l/min Min DHW pressure is 0.9 bar,max 7 bar The combi is on the ground floor, I have a shower on the first...
  3. R

    Low flow rates

    Our heating circuit consists of two pumprd circuits one for hot water and one for the main central heating. Pipe runs are long, 50m 25mm total, there and back. The main circuit works fine with adequqte flow to all radiators giving less than 10dec temp drop. The hotwater circuit although...
  4. T

    How To Tell Which Vaillant?

    Looked at the sticky for boiler manuals on here but Vaillant doesnt list many. The boiler doesn't show much info on itself but its about 2 years old apparently and about 2ft square. All it shows are the numbers 18e and 28e? Some old instructions say ecotec AND ecomax pro on them which isnt...
  5. A

    Hot water headache

    I am currently working on a Baise combiS.P.A 24s i have hot water on demand in the bathroom but non in the kitchen on the sink which is first in line from the boiler. The flow to the tap is okay,when the bath is on and i turn on the tap in the kitchen the water is hot then when i turn off the...
  6. S

    halsted high ace prob

    got a halsted high ace with a prob on the heating when i turn the heating on the burnner lights up then goes out again i removed the micro-switch from the diverter valve and put it back on and it seemed to work ok for 4 days but now the same problem is back. is the micro-switch on its way...
  7. A

    Hot water stops when cold tap run..

    Can you help, When running a bath with the hot tap running, if i turn on the cold tap, all hot water pressure goes...combi boiler is installed nothing wrong with the hot water...always hot but basically stops when the cold tap turned on..any ideas..thanks
  8. C

    Positioning pump and zone valves

    Is there a concensus about where the circulator and zone valves should be fitted? On the output from the boiler where everything is very hot, or on the return to the boiler, where everything is supposed to be some 20C cooler Our existing system has everything on the boiler return, but all books...
  9. N

    MicroGenus 23 DHW problem

    This unit is working fine on the CH side, but is erratic with the DHW. At low flow,unit heats water but at low temp and cuts in and out. At higher flow, does not fire up at all. Edit: now DHW failed completely. I can hear flow switch clicking in, but no fire up occuring. Gas and water...
  10. J

    Hot water problem

    i have had a heatline vizo 24 condensing combination boiler fitted. when i turn the hot water tap on full to fill a bath it goes cold when the tap is turned down to a dribble it turns hot again, The only other hot water tap is in the kitchen 2 foot from the boiler but this tap is ok ...
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock