Advanced Appliances thermal store

Thread starter sheff paul
Start date May 4, 2015
Replies 1
Views 1K
appliances incoming store thermal thermal store

Discuss Advanced Appliances thermal store in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status: Not open for further replies.

sheff paul

May 4, 2015

Fitting one of thease with a mate,cannot see if you need a pressure reducing valve on incoming main,manufactuer was closed today,anybody any experience of thease,this one is going to be linked up to a log buning stove,any advice would be good

Gray0689

May 4, 2015

Yes you need a 3 bar PRV on incoming mains

Status: Not open for further replies.

Reply to Advanced Appliances thermal store in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Advice needed for a mixer Spray for kitchen ?

Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two...

advice kitchen mixer needed spray

Replies: 2

Views: 223

Apr 25, 2024

Lou

Outdoor stopcock doesn't fully close

Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason...

outdoor stop cock

Replies: 3

Views: 340

Apr 19, 2024

exedon2

Central heating losing pressure all the time

Every two weeks or so I have to go and top up the system because the hot taps are running cold. Boiler display is flashing 0.6 bar and I fill up...

central central heating system losing pressure time

Replies: 2

Views: 285

Apr 28, 2024

PSxxxxxx

Towel Rail Valve Advice please (35 Characters needed.)

I have had a look at previous posts and think I know the answer to this but just before I make it worse could I just check what you think about...

towel rail valve

Replies: 7

Views: 259

Apr 25, 2024

Timmy D

Viessmann external flue run conundrum

Hi all. Hope you have all been keeping well. A while back I decided I only wanted to fit one brand of boiler and decided on Viessmann due to...

external flue viessmann

Replies: 9

Views: 327

Apr 24, 2024

mutley racers

Facebook X (Twitter) Reddit Pinterest Tumblr WhatsApp Email Link

Newest Plumbing Threads

P
How much would you pay for a universal flush valve that enables replacements in under 5 minutes?
- Started by Professor
- Yesterday at 8:25 PM
- Replies: 8
UK Plumbing Forum | Plumbing Advice
Bossing shower waste into soil pipe vs. separate shower waste
- Started by CitizenErased
- Yesterday at 2:38 PM
- Replies: 3
UK Plumbing Forum | Plumbing Advice
K
UK Advice on waste water pump in first floor flat
- Started by kbqwert
- Friday at 8:48 PM
- Replies: 2
Bathrooms, Showers and Wetrooms
A
M18x1 femail to 1/2" hose connector.
- Started by Adaminspace
- Friday at 12:13 PM
- Replies: 0
UK Plumbing Forum | Plumbing Advice
T
Off grid shower and toilet solution needed
- Started by TpXThinnr
- Thursday at 4:45 PM
- Replies: 4
Bathrooms, Showers and Wetrooms
M
Expansion vessel size unvented hot water
- Started by Matt0029
- Wednesday at 7:52 PM
- Replies: 2
UK Plumbing Forum | Plumbing Advice
M
Acrylic bath manufacturing standards/dimensions
- Started by Michelle
- Wednesday at 6:26 PM
- Replies: 2
Bathrooms, Showers and Wetrooms

Back

Top

AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock