Users can remove all display ads (not sponsors) for a small fee. Click for info (must be logged in)

Discuss Back Boiler Programmer Replacement in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Messages
5
Hi all, i have just bought a house with a back boiler in, eventually i am going to replace it but at the minute i cant afford to and have other priorities. I am however looking to change the programmer to make it easier to live with. The programmer i currently have is a Horstmann 425 tiara programmer (https://www.NoLinkingToThis/p/horstmann-425-tiara-programmer/18470) and i am looking for advice on what to replace it with and if it is something i can do or is it a complicated job. I ideally want to still be able to control the hot water and central heating seperatly and set a timer for the hot water. Cheers for any advice.
 
Do you currently have to have the heating on with the hot water? If so the system is designed this way on purpose. As the hot water will probably be gravity and the heating pumped. If this is the case the only way to get them independently would be to upgrade your system. (Sorry to say)
 
No. When i have the heating on the water automatically heats up as well. But when i have the water on on its own the the heating dosent come on. Ta.
 
Last edited:
Ok, so it is what I said above. You have to have the water on to get the heating to come on. Look at something like an LP241 timer. It has a gravity setting on the back of the timer.
 
The one recommended may need a little extra wiring work. But if you go to the horstmann website it should tell you a digital like for like if there is one. (But I do not fit Horstmann, sorry)
 

Reply to Back Boiler Programmer Replacement in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi everyone, Looking for a bit of advice, recently went to a job where heating was operating when called for however not for the hot water. I...
Replies
8
Views
386
Hello, I am seeking some advice, I have a POTTERTON PROMAX 28 COMBI Boiler and I noticed yesterday that the water around the house is no longer...
Replies
4
Views
282
We are from Alberta, and I own an electrical company. I have been asked by a BC Mechanical P. Eng. to install an emergency STOP button at the...
Replies
5
Views
315
Hi all. Hope you have all been keeping well. A while back I decided I only wanted to fit one brand of boiler and decided on Viessmann due to...
Replies
9
Views
300
Every two weeks or so I have to go and top up the system because the hot taps are running cold. Boiler display is flashing 0.6 bar and I fill up...
Replies
2
Views
275
PSxxxxxx
P
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock