Search the forum,

Baxi DuoTec fault codes

Post new thread

Discuss Baxi DuoTec fault codes in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Lambed84

Lambed84

Gas Engineer
Messages
55
Anyone know what the fault code e166 relates to on the above boiler?
Thanx in advance gents
 
Definately E166 cannot find anything about it,what exact model Duo-etc is it?
 
Just looked on baxi works no e166 but i would think it a pcb problem . cheers kop

Screenshot_2017-11-19-18-00-38.png
 
Doesn't mean anything just a glitch turn off main power to boiler leave for 5 min then switch back on was told it clears something on PCB.
 
Had a pump fitted Friday by another engineer. Turned boiler off at spur. Left for a few minutes, turned on and e168 appeared. Reset and ran fine for an hour. My guess is water ingress at pcb.
Cheers lads
 
Status
Not open for further replies.

Reply to Baxi DuoTec fault codes in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

R
Multi Meter which one for engineers
Can anyone recommend a decent multi meter, preferably under a 100 pounds. It's for checking boiler components so I don't need a top spec one ....just easy to use and reliable. The fluke 115 looks good but its above my budget. My current socket and see one was great but it's developed a fault.
Replies
7
Views
258
oz-plumber
O
A
Emergency Stop Buttons in Boiler Rooms
We are from Alberta, and I own an electrical company. I have been asked by a BC Mechanical P. Eng. to install an emergency STOP button at the man-door to the boiler room. It's intent is to 'halt' the operation of the boilers in the room should there be an emergency. He is demanding that I do...
Replies
5
Views
289
oz-plumber
O
M
Viessmann external flue run conundrum
Hi all. Hope you have all been keeping well. A while back I decided I only wanted to fit one brand of boiler and decided on Viessmann due to space for servicing and changing parts if ever needing to. I am finding my decision rather hard due to the different clearances on flue runs and cupboards...
Replies
9
Views
228
mutley racers
M
dreikher
Hole in copper pipe, solder under floor, T coupling & protection
I was stupid enough not to check the position of the pipes under the tiles when installing a toilet and drilled right through the center of a 16 mm copper water pipe. I exposed the pipe by removing a ~30cm section of the plastic sleeve and a ~10 cm section of the pipe around the hole. Several...
Replies
0
Views
213
dreikher
dreikher
ian.
UK Auto balance trv and Ideal Vogue boiler
I have an ideal vogue max S18 boiler and I’m considering fitting auto balancing TRVs, my question relates to the boilers pump. I see a boiler pump menu for either 70% or 100%, so, is the pump set at either one of two fixed speed percentages or does the pump actually vary speed, (modulate)...
Replies
1
Views
170
John.g
J
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Electrical Advice
Tile Blog
Tile Talk
Tiling Advice Live
Plumbers' Talk
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock