Search the forum,

Baxi sample point cap.

Post new thread

Discuss Baxi sample point cap. in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
L

London Gas

Gas Engineer
Messages
94
Does anyone know where I can get one of the older Baxi/Potterton flue sample points for Suprimas, I have gone out to a property and this is missing off of the boiler, Baxi are saying that they don't supply these separately although the person I spoke to didn't seem too sure about this.

mD_-Lmxuu0VMt4Oq1fBa-dg.jpg


Chrome cap to cover these sample points, they are saying you have to buy the vertical flue kit for this.

Thanks in advance.
 
just get a threaded brass cap
 
Status
Not open for further replies.

Reply to Baxi sample point cap. in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

M
Viessmann external flue run conundrum
Hi all. Hope you have all been keeping well. A while back I decided I only wanted to fit one brand of boiler and decided on Viessmann due to space for servicing and changing parts if ever needing to. I am finding my decision rather hard due to the different clearances on flue runs and cupboards...
Replies
9
Views
195
mutley racers
M
S
Advice needed for a mixer Spray for kitchen ?
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
118
Lou
Lou
D
Extending outdoor tap and drain
Hello all, I'm would like to extend an existing outside tap to another point in the garden. I'm about to pour a concrete patio and was hoping to run the water line underneath. There are existing drain (and who knows what) pipes running along the same wall so I'm nervous about digging too far...
Replies
6
Views
227
DIwhYdidIstartThis
D
D
Covering shallow sewer pipe under concrete Patio
Hello all, I’m replacing a concrete paving slab patio in the back yard. The original patio used 50mm deep concrete slabs on hardcore & sand. I’m planning to pour a 100mm deep concrete patio on 100mm hardcore. In order to achieve the same final height to line up with the rest of the patio, I...
Replies
6
Views
232
DIwhYdidIstartThis
D
C
Y Plan, no hot water but heating is working when called
Hi everyone, Looking for a bit of advice, recently went to a job where heating was operating when called for however not for the hot water. I have changed the 3 port actuator Honeywell head however this doesn’t seem to have solved the issue, does this mean that the programmer is faulty? Or is...
Replies
8
Views
277
John.g
J
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Tile Blog
UK Tiling Forum
Tilers Forums UK
Contractor Talk
Tiling Advice
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock