Discuss Baxi sample point cap. in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

London Gas

Gas Engineer
Messages
94
Does anyone know where I can get one of the older Baxi/Potterton flue sample points for Suprimas, I have gone out to a property and this is missing off of the boiler, Baxi are saying that they don't supply these separately although the person I spoke to didn't seem too sure about this.

mD_-Lmxuu0VMt4Oq1fBa-dg.jpg


Chrome cap to cover these sample points, they are saying you have to buy the vertical flue kit for this.

Thanks in advance.
 
just get a threaded brass cap
 
Status
Not open for further replies.

Reply to Baxi sample point cap. in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi all. Hope you have all been keeping well. A while back I decided I only wanted to fit one brand of boiler and decided on Viessmann due to...
Replies
9
Views
322
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two...
Replies
2
Views
220
Hello all, I'm would like to extend an existing outside tap to another point in the garden. I'm about to pour a concrete patio and was hoping to...
Replies
6
Views
288
Hello all, I’m replacing a concrete paving slab patio in the back yard. The original patio used 50mm deep concrete slabs on hardcore & sand. I’m...
Replies
6
Views
319
Hi everyone, Looking for a bit of advice, recently went to a job where heating was operating when called for however not for the hot water. I...
Replies
8
Views
396

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock