Search the forum,

Discuss Best power flush fluid? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Hi guys!
I've just purchased a power flush pump system.

And would like some advice on what is the best fluid to use for badly clogged systems that have limescale , and where to buy it from.

Thanks in advance guys!
 
or x800 but dont think it will work with limescale

ds3 if its limescale
 
Kemco chemicals work very well I have one of there units its about 15 years old now and still going fine, But found that there own products work good in hard water areas. Parts Centre used to stock them or buy direct
 
Status
Not open for further replies.

Reply to Best power flush fluid? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi all Noticed bad smell in my drain out side put my hand down and it unclogged it for now however I checked my sewer drain and after flushing my...
Replies
3
Views
561
    • Like
  • Sticky
We have 2 brand new cordless, battery powered press tools in stock, and flying off the shelves. Our TekTools TZ1930 & TZ1550 are packed with...
Replies
5
Views
956
We are from Alberta, and I own an electrical company. I have been asked by a BC Mechanical P. Eng. to install an emergency STOP button at the...
Replies
5
Views
307
P
  • Question
Boiler is SIRIUS THREE FS 70 Potterton commercial. Situation: We are small building contractors and my labourers managed to damage the radiator...
Replies
2
Views
102
Hi All I have a leak coming from within my Mira Elite QT shower. It seems to be flowing from behind the switching Control. Any ideas what could...
Replies
0
Views
258
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock