Discuss Can I place a cross T fitting for a gas line? in the UK Plumbing Forum | Plumbing Advice area at PlumbersForums.net
- Messages
- 13
Yes, but why it's needed?
- Messages
- 34,371
- Solutions
- 2
You will have to upsize as there’s going to be extra load on the meter
Reply to Can I place a cross T fitting for a gas line? in the UK Plumbing Forum | Plumbing Advice area at PlumbersForums.net
Similar plumbing topics
Hi all,
I am a plumber but I do not carry out works to boilers as the majority of my is bathrooms so I am not gas safe.
I have completed a...
I was stupid enough not to check the position of the pipes under the tiles when installing a toilet and drilled right through the center of a 16...
I saw on a plumerparts posts comments that the gas engineer always used an inline filter on the gas line to the boiler due to debris.
I’ve just...
I just had installed a Navien NPE-2 with built in recirculator pump. I have a dedicated return line. The check valve for the recirc is built into...
Hi sorry im a newbie, pls help if u can.
I had a new bathroom installed about a yr ago and since then when i flush the toilet the room stinks of...
Newest Plumbing Threads
-
Bossing shower waste into soil pipe vs. separate shower waste- Started by CitizenErased
- Replies: 3
-
UK Advice on waste water pump in first floor flat
- Started by kbqwert
- Replies: 2
-
AM18x1 femail to 1/2" hose connector.
- Started by Adaminspace
- Replies: 0
-
Off grid shower and toilet solution needed
- Started by TpXThinnr
- Replies: 2
-
Expansion vessel size unvented hot water
- Started by Matt0029
- Replies: 2
-
Acrylic bath manufacturing standards/dimensions
- Started by Michelle
- Replies: 2
-