Discuss first time fitting urinals in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Messages
910
Hey am working on a commercial project at the momment, usualy work on the domestic side of plumbing. So this will be the first time I have had to fit urinals just wonderd if anyone had any advice about fitting them? Got any tips etc, are they held on brackets? and does the chrome pipe that carries the waters from the cistern come pre-bent?
 
The pipe comes pre-bent?
You're kidding? I have been in awe of some of the pipe bending skills in public urinals in the past, I'm sad enough to point this out to fellow slashers if I've had a few shandies...
 
Their called sparge pipes.

And you can bend your own. Just record bending points and its easy
 
Empty apple juice bottle.
 
Status
Not open for further replies.

Reply to first time fitting urinals in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi, Short version: I have about 4" of pipe sticking out of a concrete floor in a cupboard. It makes a 45-degree bend as it exists (bent, not with...
Replies
14
Views
1K
In our Village Hall we have a Ideal Concord CXS/SD40/H central heating boiler. This was installed new when we had an extension built and the...
Replies
10
Views
1K
Hey all, Excuse me if I get some facts wrong, I'm a complete noob when it comes to anything other than replacing radiators. We're about to get...
Replies
10
Views
3K
Hello All and thanks Lou i did write a reply but it would not let me send it? i am not sure what I am meant to write and I do not want to come...
Replies
1
Views
890
Hi there, I'm having a bathroom remodel. It would be appreciated to get some expert advice. Plumber ripped out existing bathroom and most of the...
Replies
10
Views
4K
Back
Top