Discuss Help with CCN1 qualification in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Messages
6
Hi everyone, I'm taking my CCN1 tomorrow and would like some advice on things that I possibly could slip up on.
I've studied as best I could but worry that something could come up that I've overlooked. Any things to look out for?
 
Hello and welcome
 
Is it actually the exam or are you doing some training first?

My advice is read the question twice before answering some of them are written funny.

Everything is in the books and nothing is there to catch you out.

Practical just be slow and steady if you start struggling take a step back for a minute. Get the manufacturer's instructions out and have a quick read.
 
Is it actually the exam or are you doing some training first?

My advice is read the question twice before answering some of them are written funny.

Everything is in the books and nothing is there to catch you out.

Practical just be slow and steady if you start struggling take a step back for a minute. Get the manufacturer's instructions out and have a quick read.
Thanks, for your advice. I will take this on board
 

Reply to Help with CCN1 qualification in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

hi all i was attempting to install the tiles today on the wall. if you look at the photo, i started at the pipe work as that was the most...
Replies
23
Views
1K
Hi everyone, I'm hoping to get some advice on an issue I'm having with my Vaillant Ecotec Pro 24 boiler (R1 PCB). It was installed in 2013 and has...
Replies
1
Views
254
Hi , i'm new to this forum & would like some advice , i have an upstairs bathroom & was wondering if i could put a cloackroom loo downstairs , my...
Replies
22
Views
1K
Hi everyone, Looking for a bit of advice, recently went to a job where heating was operating when called for however not for the hot water. I...
Replies
8
Views
482
I've air tested pipework for years, typically 4 bar for 30 minutes. I've never had an issue with any pipework that has passed that test...
Replies
8
Views
532
Back
Top