Please do. I agree they should be shared!Well that's good news thenThanks for confirming. Please feel free to nick a biscuit or two off of Ric2013's plate above...
Discuss Honeywell three port motorised valve - replace the whole thing? And other questions... in the USA area at PlumbersForums.net
- Messages
- 2,558
Well that's good news then
Your old Danesmoor is probably worth considering upgrading at the same time if you're planning on a major overhaul.
Reply to Honeywell three port motorised valve - replace the whole thing? And other questions... in the USA area at PlumbersForums.net
Similar plumbing topics
Hi everyone,
Looking for a bit of advice, recently went to a job where heating was operating when called for however not for the hot water. I...
I want to reconnect some outbuildings to an existing water supply. The supply pipe is old 22mm MDPE and buried for a fair distance so not going...
I was stupid enough not to check the position of the pipes under the tiles when installing a toilet and drilled right through the center of a 16...
Hi all I'm hoping someone can shine a light on this for me
Since our stop tap on the pavement has now been filled with sand for whatever reason...
Hello all,
I'm would like to extend an existing outside tap to another point in the garden. I'm about to pour a concrete patio and was hoping to...