Search the forum,

How's the scrap price at the moment...

Post new thread

Discuss How's the scrap price at the moment... in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
I let the travelling fraternity have mine, got to help the homeless at Xmas :6:
 
townfanjon said:
All mine is stripped but , never any clean copper
£2.50 Brazery
£ 2.00 brass
Trinity metals , only reason I go is it is a 20 min drive,

Cheers for the Otley tip Jules , a mega van full maybe a good idea.

If anybody local to me knows the tale about Frances / Trinity , joke init lol
Click to expand...
yes i weigh in just twice a year, christmas and june/julyish
 
Weighed mine earlier, £3.84 a kilo for clean copper. Got £1280 in total for copper, brazzery and brass :)
 
Today's prices
Clean copper/copper with solder fittings £4 kg
Painted copper/copper with brass fittings £3.75
Brass taps etc £2.55
Lead pipes £1.35
 
New posts
Status
Not open for further replies.

Reply to How's the scrap price at the moment... in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

sammie81116
Sewer pipe problems not sure about it
Hi all Noticed bad smell in my drain out side put my hand down and it unclogged it for now however I checked my sewer drain and after flushing my toilet a good few times nothing is going to the sewer so don't know is there a blockage or what way it works many thanks and advice would be grateful
Replies
3
Views
559
Chuck
C
C
Mixer bar fitting solutions?
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new brackets, dismantle that existing one and start again or I could try and re attach via those screws, removing the broken ones from the plate and wall...
Replies
1
Views
237
SimonG
SimonG
D
UK Can't get stopcock 100% closed to allow a tap repair
I have a plumber coming tomorrow to change a cartridge on a badly dripping tap on my bathroom mixer unit. There is no separate isolating valve for this tap so I'll have to close the stopcock. I tried closing it today but it won't go absolutely 100% closed and there is still a very slight flow...
Replies
1
Views
276
Chuck
C
J
Leak detection company
Does anyone know a good, not super expensive, leak detection company in the London area?
Replies
0
Views
312
John-sjw
J
dreikher
Hole in copper pipe, solder under floor, T coupling & protection
I was stupid enough not to check the position of the pipes under the tiles when installing a toilet and drilled right through the center of a 16 mm copper water pipe. I exposed the pipe by removing a ~30cm section of the plastic sleeve and a ~10 cm section of the pipe around the hole. Several...
Replies
0
Views
220
dreikher
dreikher
Creating content since 2001. Untold Media.

Newest Plumbing Threads

UK Tiling Forum
UK Tiling Forum
Electrician Talk Forum
Tiling Forums UK
Tile Forum
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock