No flexi, soil pipe into the stack possible?

[Lumen]

Hi chaps,

I’m installing wall hung toilet with a frame. I’m looking to run waste pipe without a flexi, but can’t figure out what’s on the market that will do that.
The waste on the frame is 90mm and has grooves for attaching into the frame and my soil stack is 110mm. I’m out by about 50mm depth and 80mm in hight, but for the life of my can’t find any solid connectors that would allow my to run the waste pipe.
Any advice would be much appreciated.

Cheers,
Lumen

 

[ShaunCorbs]

They do a straight adapter then all you need is a street 90 soil bend

 

[Lumen]

They do a straight adapter then all you need is a street 90 soil bend

Thank you for you reply.
Is this Roca or somebody else? As I looked at Roca’s spares catalog prior to posting here and didn’t see anything suitable.

 

[ShaunCorbs]

Yes the frame manufacturer where you bought it from should be able to help in regards to the straight adapter

 

[Lumen]

Yes the frame manufacturer where you bought it from should be able to help in regards to the straight adapter

Thank you, I will reach to manufacturer to see what they say. What’s the best way to compensate for hight misalignment afterwards?

 

[ShaunCorbs]

Depends how much you might be able to get away with either a street 45 or another street 90 up

 

[SimonG]

Normally come with straight and angled adaptors.

 

[Lumen]

Normally come with straight and angled adaptors.

This frame is Roca Duplo, these only come with angles waste, I’ve looked at Grohe, their frames also only have the e fled waste pipe.

 

[Ben-gee]

Geberit come with 90 deg, but you can buy straight if needed. I’d be surprised if the others didn’t do this too.

 

[Lumen]

Found it.
Roca UK after sells support were excellent and advised in few minutes over the phone.
If anyone else looking for one, here’s the part number: 892028000
Thank you all for your help.