Search the forum,

Discuss Oh right. My mistake. You're an engineer. in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
O

oddball

Yep
5 year apprenticeship mech & prop eng
C ad G 205 parts 1, 2, 3 and tool making endorsement

OH dear moderator NVQ I forgot !

So I think I will be banned as you don't like any criticism.
 
oooh your here now, well from what I can see your a technician, no degree mentioned that would allow you to call yourself an engineer.....
 
Well done with that.

But I can't see one qualification for gas safe!
As you can probably understand lots of people come on here asking for advice on gas. We don't keep the info to annoy you, or to keep the money in our pockets. It's ( honestly ) for your safety.
 
Oh, what are we going to do now? that was getting interesting.........................
 
I try not to boast about having a science degree I did through the open university 13yrs ago as I still struggle to work out purge volumes in pipework. lol
 
I try not to boast about having a science degree I did through the open university 13yrs ago as I still struggle to work out purge volumes in pipework. lol

Ooh get you mastermind! I've got a cycling proficiency badge and a 10meter front crawl badge.
 
:( feeling left out as i have no degrees :D
 
Ooh get you mastermind! I've got a cycling proficiency badge and a 10meter front crawl badge.

Need to see proof of these qualifications. I know a lot of guys who say they qualifications in front crawl, but 9/10 time its in breast stroke. I demand you post your badge online.
 
I was in this image.jpg
 
I was a cub scout - 1st Northolt Sea Scouts, :nono: All my other qualifications that one...Trumps

donald-trump.jpg


All yours :D PS I didn't break wind when that last photo was taken :D
 
Last edited by a moderator:
where do these halfwits keep coming from,i thought we had a reprobate filter
 
What is wrong with people!

He is the type that thinks rules aren't for him cos he's an engineer and has a limited knowledge of what he wants to achieve

Because he isn't aware his knowledge is limited, he'll probably just blunder his way through the job completely oblivious to the dangers he may be putting himself, his family and possibly his neighbours in

You see it in the news every now and again, half a street blown up and a few people killed

All tragedies that can be avoided
 
Ive got a few from the Amateur Athletics Association.
 
Last edited by a moderator:
Status
Not open for further replies.

Reply to Oh right. My mistake. You're an engineer. in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

B
  • Locked
Hi All, I am a 16 year old school leaver (Sept 23) looking for a local company to take me on as an apprentice plumber. I live in Benfleet and am looking to join a plumbing and heating engineer 4 days a week whilst I attend College to gain my level 3 plumbing and heating qualifications. if...
Replies
0
Views
50
Billy Barnard
B
    • Like
  • Sticky
We have 2 brand new cordless, battery powered press tools in stock, and flying off the shelves. Our TekTools TZ1930 & TZ1550 are packed with advanced features - these cordless press tools are engineered for speed, precision, and ease of use across various applications. Just reply to this thread...
Replies
5
Views
936
The left rear floor corner is highest (the shower pan touches/sits on the floor), sloping down diagonally to the front right corner (lowest). The front right corner shim is 5/8", the left front corner is 3/8" shimmed, with shorter shims under left middle and right rear corner. The pan perimeters...
Replies
6
Views
221
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
168
Hi bit of a weird issue, I installed a grohe bathroom tap successfully 2 months ago bought from screwfix. Last week the right hand hot tap makes a squeak noise as I turn it on or off, left tap is 100% perfect and noiseless. This grohe tap is like one unit, so no screw notch or way I can remove...
Replies
7
Views
302
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock