Question from an Industrial Design Student developing tools

[bastrouw]

Dear Forum readers,

My name is Bas Trouw, 23 and student Industrial Design in Enschede, the Netherlands. I am currently doing a project for a large German Tool Manufacturer. For this project, I have to develop a new set of pliers/handtools.

For inspiration and idea's I would like to ask you to tell me all of your:

- irritations regarding existing tools. These could be caused by limitations of the tools for example
- Problems in and around the house that could use a tool to solve the problem.
- Own idea's for a new type of tool (you must be thinking sometimes: "they should make a tool for this")

I hope you guys can help me. All the help is appreciated!!!

thank you!

Bas Trouw

 

[Dotty]

Bas is where he says he is guys. Feel free to answer candidly.

 

[Robert Tyrrell]

A pair of water pump pliers that work with a ratchet action, and can move around compression fittings that are fitted on the pipe that is clipped to the wall might be good.

 

[SafeGasInstall]

cutting copper pipe that are fixed to wall and there is not movement on pipe work to put a pipe cutters

 

[Gas]

Carbon fibre kevlar reinforced composite Footprints and Cobras.

That stuff they use in F1 cars that is 20 times the strength of steel

 

[lame plumber]

cutting copper pipe that are fixed to wall and there is not movement on pipe work to put a pipe cutters

been invented already its call a hacksaw

 

[galaxy_plumbing]

A pair of water pump pliers that work with a ratchet action, and can move around compression fittings that are fitted on the pipe that is clipped to the wall might be good.

i was thinking this long time ago as it could be handy tool to have

 

[Gas]

i was thinking this long time ago as it could be handy tool to have

What am i missing? How can it be better to have for domestic/commercial plumbers? On industrial you wind threads in for ages, but a ratchet would break in no time.

I can use Footprints as fast as a ratchet spanner, it would just be an unnecessary tool imo

Loved to be proved wrong though

 

[galaxy_plumbing]

never know until you try it

 

[Killy Bing]

A set of parallel smooth jawed plyers with extended "teeth" so you could use them between pipes.

or a set strong enough that can be "locked" into position and flogged with a hammer.

 

[bastrouw]

Hi SafegassInstal,

Thanks you! could you explain to me why it is important to keep the pipe work steady? How do regular pipe cutters fail you at the moment?

 

[bastrouw]

Thank you guys! This helps a lot! Keep the ideas coming!

 

[stevetheplumber]

cutting copper pipe that are fixed to wall and there is not movement on pipe work to put a pipe cutters

angle grinder with thin blade

 

[Ermintrude]

A simple tool to fix an ideal isar. Hickory Handel and a metallic head?

 

[tamz]

Hi SafegassInstal,

Thanks you! could you explain to me why it is important to keep the pipe work steady? How do regular pipe cutters fail you at the moment?

He doesn't mean the pipe work has to be steady. He means it is an existing pipe fixed into position that needs cutting normally with a 12 -15mmm gap all around.
Is there commission in this? :smile: