Users can remove all display ads (not sponsors) for a small fee. Click for info (must be logged in)

Discuss Radiators with or without TRV's in the USA area at PlumbersForums.net

C

Colin Noble

I have 2 vertical radiators , when the TRV is fitted the radiators fail to get hot. I have replaced both TRVs for new and check the operation of the valve to confirm is correct operation but still no heat

If I removed the TRVs completely the radiators get hot, I would be grateful if someone could help
 
Heads faulty maybe ? Have you tried new ones
 

Reply to Radiators with or without TRV's in the USA area at PlumbersForums.net

Similar plumbing topics

I have had a look at previous posts and think I know the answer to this but just before I make it worse could I just check what you think about...
Replies
7
Views
255
  • Question
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold...
Replies
2
Views
216
Every two weeks or so I have to go and top up the system because the hot taps are running cold. Boiler display is flashing 0.6 bar and I fill up...
Replies
2
Views
280
PSxxxxxx
P
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new...
Replies
1
Views
263
Hi everyone, Looking for a bit of advice, recently went to a job where heating was operating when called for however not for the hot water. I...
Replies
8
Views
389
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock