Discuss Repair leaking toilet pan connector in the DIY Plumbing Forum area at PlumbersForums.net

Messages
1
Would appreciate it if somebody could list the steps required to replace a leaking toilet pan connector.
 

Attachments

  • IMG20230720104527_BURST001_COVER.jpg
    IMG20230720104527_BURST001_COVER.jpg
    377.7 KB · Views: 16
  • IMG20230723105414.jpg
    IMG20230723105414.jpg
    359.5 KB · Views: 16
Remove toilet
Cut back 4” pipe 3”-4”
Cut and Install new mcalpine con 2
Install a new flush pipe connector
Reinstall toilet
 

Reply to Repair leaking toilet pan connector in the DIY Plumbing Forum area at PlumbersForums.net

Similar plumbing topics

The left rear floor corner is highest (the shower pan touches/sits on the floor), sloping down diagonally to the front right corner (lowest). The...
Replies
6
Views
272
Does anyone know where I can get one of these? Toilet is leaking into the bowl. This one pushes in with a half turn but I can't find one anywhere.
Replies
2
Views
235
Hi All I have a leak coming from within my Mira Elite QT shower. It seems to be flowing from behind the switching Control. Any ideas what could...
Replies
0
Views
273
I want to reconnect some outbuildings to an existing water supply. The supply pipe is old 22mm MDPE and buried for a fair distance so not going...
Replies
1
Views
321
I was stupid enough not to check the position of the pipes under the tiles when installing a toilet and drilled right through the center of a 16...
Replies
0
Views
240
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock