Search the forum,

Sabre boiler in kitchen cupboard

Post new thread

Discuss Sabre boiler in kitchen cupboard in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
P

Pompeymike79

Messages
3
Hi
I'm about to refit our kitchen, but have a pretty ugly Sabre 29 HE boiler in one corner. Am I able to build this into a kitchen cabinet?

The installation guidance gives a minimum clearance at the front of 600mm, but does this include a kitchen cabinet door?

Thanks in advance.

Mike
 
No it doesn't the given sizes are clear sizes so after them your fine
 
Pompeymike79 said:
Hi
I'm about to refit our kitchen, but have a pretty ugly Sabre 29 HE boiler in one corner. Am I able to build this into a kitchen cabinet?

The installation guidance gives a minimum clearance at the front of 600mm, but does this include a kitchen cabinet door?

Thanks in advance.

Mike
Click to expand...
If you are fitting a new kitchen do you have the budget to change the boiler at the same time?
 
Pompeymike79 said:
Hi, sorry I'm probably being dumb, but I don't think I understand. Is it ok to put it in a kitchen cabinet?
Click to expand...

Yes fine just make sure it can be removed when you decide to change the boiler
 
Harvest makes a good point , the last thing you want is to be changing the boiler after the kitchen is fitted , yes ok its fine now and hopefully will be for a few years to come , have you any idea how old it is , if its under 5 forget it , if its approaching 10 , I would seriously consider it . My opinion of course .
 
I agree i would seriously consider changing it you will achieve a better finish on your new kitchen as a modern boiler is alot smaller . cheers kop
 
Status
Not open for further replies.

Reply to Sabre boiler in kitchen cupboard in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

F
What constitutes a Commercial Appliance and thus a Commercial Kitchen?
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is a 23.8Kw appliance with all six burners and oven on max. This was installed some 10 years ago and has passed all subsequent Gas Safety inspections as...
Replies
5
Views
496
FozzieBear
F
G
UK Moving Pipes Undersink for Dishwasher
Hello I am looking to install a slimline dishwasher (integrated) into a cupboard in my kitchen. The depth of the dishwasher is 550mm and the depth of my cupboard is larger than this. The issue, however, is that the waste pipe which leads from the sink (next door cupboard) comes out quite a...
Replies
22
Views
414
Basher
B
M
Viessmann external flue run conundrum
Hi all. Hope you have all been keeping well. A while back I decided I only wanted to fit one brand of boiler and decided on Viessmann due to space for servicing and changing parts if ever needing to. I am finding my decision rather hard due to the different clearances on flue runs and cupboards...
Replies
9
Views
222
mutley racers
M
A
Emergency Stop Buttons in Boiler Rooms
We are from Alberta, and I own an electrical company. I have been asked by a BC Mechanical P. Eng. to install an emergency STOP button at the man-door to the boiler room. It's intent is to 'halt' the operation of the boilers in the room should there be an emergency. He is demanding that I do...
Replies
5
Views
275
oz-plumber
O
Creating content since 2001. Untold Media.

Newest Plumbing Threads

DIY Talk
Tilers Forums UK
Tiling Advice Live
Tiling Advice
Tiling Forum
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock