I am currently doing a new build requiring 2 shower trays to use as walk in showers. The tray I currently have does not appear to have angled rims around the edges so water constantly pools at the sealant and doesn't run into the tray and drain. Can anyone recommend d a tray that does have angled rims, even if the angle is small or does this not exist?
Users can remove all display ads (not sponsors) for a small fee. Click for info (must be logged in)
Discuss Shower tray with angled rim around it in the Bathrooms, Showers and Wetrooms area at PlumbersForums.net
Reply to Shower tray with angled rim around it in the Bathrooms, Showers and Wetrooms area at PlumbersForums.net
Similar plumbing topics
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new...
Hi all. Hope you have all been keeping well.
A while back I decided I only wanted to fit one brand of boiler and decided on Viessmann due to...
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is...
- Question
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold...
I was stupid enough not to check the position of the pipes under the tiles when installing a toilet and drilled right through the center of a 16...
Newest Plumbing Threads
-
Expansion vessel size unvented hot water
- Started by Matt0029
- Replies: 0
-
Acrylic bath manufacturing standards/dimensions
- Started by Michelle
- Replies: 2
-
-
Daryl Shower Head replacement (possibly over 30 years old)
- Started by morrig47
- Replies: 0
-
Can someone please identify what this hose is?
- Started by louisjamesbanks17
- Replies: 1
-
Blocked waste pipe - Inspection cover problem.
- Started by Urbanbassman
- Replies: 2
-
See the Stunning Before and After of These 6 Local Kitchen and Bath Makeovers- Started by Dan
- Replies: 0