Users can remove all display ads (not sponsors) for a small fee. Click for info (must be logged in)

Discuss solvent weld waste fittings/overflow fittings turned yellow in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

stratplus

Plumbers Arms member
Plumber
Gas Engineer
Messages
963
Thought these only turned a yellow tint when uv hit them?
Had some kept in a dark shed for a while in a plastic tub and they have started to turn yellow, especially the overflow fittings.
 
The white rainwater used to go pink in UV.

But don't worry, there is no additional charge for the colour-morphing fittings.
 
Thought these only turned a yellow tint when uv hit them?
Had some kept in a dark shed for a while in a plastic tub and they have started to turn yellow, especially the overflow fittings.
It may be time to finally fix that hole in the roof.....[emoji6]
 
kay-jay804344 said:
It may be time to finally fix that hole in the roof.....[emoji6]

Hehe, no hole In my roof! Fittings 4+ years old though!
 
ive had the same thing happen, you would expect it of abs in sun light as its an internal only pipe but in a dark shed :(
 
Its the amount of fire retardant in the plastic that turns it yellow after a few years.
 
Status
Not open for further replies.

Reply to solvent weld waste fittings/overflow fittings turned yellow in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Copper pipes, I think its fair to say, is not what it used to be, the copper is getting thin while the cost is going up. Meanwhile, plastic...
Replies
2
Views
309
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason...
Replies
3
Views
334
IS IT POSSIBLE TO ADJUST THIS MIXER UNIT? WE HAVE TO HAVE IT TURNED ALMOST FULLY ANTI CLOCKWISE TO GET HOT WATEROUT. THE FRONT PLATE WITH MIRA ON...
Replies
6
Views
279
I want to reconnect some outbuildings to an existing water supply. The supply pipe is old 22mm MDPE and buried for a fair distance so not going...
Replies
1
Views
318
Hi all. Hope you have all been keeping well. A while back I decided I only wanted to fit one brand of boiler and decided on Viessmann due to...
Replies
9
Views
319
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock