Users can remove all display ads (not sponsors) for a small fee. Click for info (must be logged in)

Discuss Sound of running water but nothing is turned on? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Messages
6
Water is constantly running through the cold pipe that leads directly from my stop tap through a few meters of pipe along and then upstairs. I can clearly hear it (and so can the rest of the family)and feel the vibration caused by the flow of water through the pipe. When I turn the stop-cock off it stops. Nothing is turned on. Toilets are full and not leaking. No problems with anything water-using fixture save a slight drop in pressure you'd expect when more than one appliance is being used at the same time. After hours of searching no signs of a leak anywhere. And this has been going on all weekend so if there was a leak I'd presume water'd be everywhere given the sound is noticeable. No wet ceilings, no sound of spraying water under floorboards etc. Very confused as I think I've eliminated everything. Can anyone help please?
 
How old is the property, could easily be a leak under the floor, any signs of damp around the outside of the property.
 
It's a mid 50's council property. Concrete floors. No signs of a leak from upstairs. The bathroom is directly above a part of the kitchen where I know water would come through (previous with son!). Celing plasterboard is dry and solid - sounds hollow when I tap it. Pressure in shower is lower than normal but still working fine. No sound of a leak from bathroom but it's the only water up there (upside down glass on shower tray etc). Could it be an external leak simply transmitting sound along the pipe? Thanks
 
50s council house. No signs of an internal leak and the sound has been there all weekend. Bathroom is directly above kitchen and from previous with son (!) I know where water would leak through. Ceilings are solid and hollow sounding when I tap them. No signs of an external leak, but could the sound from an external leak transmit along the pipe? (when I turn the stop tap off the same vibration is still on the external side). Thanks
 
Yes it could be an underground burst, but I remember correctly it usually goes louder if you turn it off at your internal stopcock.
 
Thanks Pete - but nothing in the loft. No overflows, no water running away externally, just the sound and vibration of water going through the internal pipe when nothing water-related is being used. I can't fathom it....
 

Reply to Sound of running water but nothing is turned on? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason...
Replies
3
Views
334
Hello all, I'm would like to extend an existing outside tap to another point in the garden. I'm about to pour a concrete patio and was hoping to...
Replies
6
Views
284
I was stupid enough not to check the position of the pipes under the tiles when installing a toilet and drilled right through the center of a 16...
Replies
0
Views
235
Hello all, I’m replacing a concrete paving slab patio in the back yard. The original patio used 50mm deep concrete slabs on hardcore & sand. I’m...
Replies
6
Views
313
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4...
Replies
9
Views
440
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock