B
Beemer5
I'm having a clear out and came across an unused Sunvic 207XLS programmer, my question is can it be used with the Main HE30 boiler?
- Thread starter Beemer5
- Start date
- Replies 2
- Views 691
- anything he30 main programmer sunvic
Discuss Sunvic 207 Programmer & Main HE30 in the Plumbing Jobs | The Job-board area at PlumbersForums.net
Reply to Sunvic 207 Programmer & Main HE30 in the Plumbing Jobs | The Job-board area at PlumbersForums.net
Similar plumbing topics
I have tried hard to get similar to the first class satchwqell /Sunvic SML type revolving type valves instead of the quite short lived spring...
It was fitted with the boiler a Potterton Suprima 30L about 21 years ago. Two PCB's later and a new fan the boiler is working perfectly. However...
Hi,
I am trying to link a Hive heating & hot water dual channel receiver to an old Vaillant THERMOcompact VU GB 242/1 E system boiler.
It has an...
Thermostat and Programmer not communicating with Boiler. Both have been replaced. Any ideas?
On the Glowworm boiler 18sxi I can use the CH...
- Ravi Patel
- Central Heating Forum
Hi all, the second Salus programmer thermostat has failed on my Grant oil fired combi boiler. Reading on here, I gather Salus aren’t very highly...
Newest Plumbing Threads
-
How much would you pay for a universal flush valve that enables replacements in under 5 minutes?
- Started by Professor
- Replies: 8
-
Bossing shower waste into soil pipe vs. separate shower waste- Started by CitizenErased
- Replies: 3
-
UK Advice on waste water pump in first floor flat
- Started by kbqwert
- Replies: 3
-
AM18x1 femail to 1/2" hose connector.
- Started by Adaminspace
- Replies: 0
-
Off grid shower and toilet solution needed
- Started by TpXThinnr
- Replies: 5
-
Expansion vessel size unvented hot water
- Started by Matt0029
- Replies: 2
-
Acrylic bath manufacturing standards/dimensions
- Started by Michelle
- Replies: 2