Discuss Vitodens 200 (Viessman) in the Central Heating Forum area at PlumbersForums.net

Messages
1
I have this boiler to heat and provide hot water for my home. I have had a total of three of these boilers. The first two were recalled by Viessman and replaced. The problems with the recalled boilers was I had to keep replacing ionization and ignition electrodes. There was also some risk of carbon monoxide leakage.

The last one was replaced in 04/2021. So it's been working fine for over a year. Recently (October 2022) it's been shutting off with error code EE (combustion failure) every day, sometimes multiple times per day. I just had my plumber come out (Nov 2022) and replace the ionization electrode for $300. The plumber said this is a constant problem with this boiler and be prepared for the failures to continue. I'm getting a bad feeling again about this boiler again.

I've been to Viessman's website where you can input your serial number and see if it's a recall boiler. My number (75547031010311120 -B2HB 160) was not a recall boiler for now.

I have a question if any customers or professional plumbers are aware of this issue and can share any advice?
 

Attachments

  • 20221107_163453.jpg
    20221107_163453.jpg
    592.8 KB · Views: 14
  • 20221107_163037.jpg
    20221107_163037.jpg
    408.9 KB · Views: 14
Last edited:
Not heard of a persistant problem like this with the 200, might be worth contacting Viessman UK or Europe technical to see if they can shed any light.
 
Isn’t the boiler under warranty?
 

Reply to Vitodens 200 (Viessman) in the Central Heating Forum area at PlumbersForums.net

Similar plumbing topics

I have an ideal vogue max S18 boiler and I’m considering fitting auto balancing TRVs, my question relates to the boilers pump. I see a boiler...
Replies
1
Views
190
Every two weeks or so I have to go and top up the system because the hot taps are running cold. Boiler display is flashing 0.6 bar and I fill up...
Replies
2
Views
281
PSxxxxxx
P
  • Question
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold...
Replies
2
Views
219
Hi all. Hope you have all been keeping well. A while back I decided I only wanted to fit one brand of boiler and decided on Viessmann due to...
Replies
9
Views
320
We are from Alberta, and I own an electrical company. I have been asked by a BC Mechanical P. Eng. to install an emergency STOP button at the...
Replies
5
Views
322

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock